JVC Model DLA-HX1E manual Effective Range and Distance of the Remote Control Unit

Installing the Projector

Effective Range and Distance of the Remote Control Unit

Using as a wireless remote control unit

The operable distance of the remote control unit is about 7 m for direct reception. The remote control unit can be used by having the transmission signal reflected off a screen. In this case, please set the total distance A + B where A is the distance from projector to screen and B is the distance from screen to remote control, within 7 m. The operable angles of the remote control unit are 30˚ right and left, and 20˚ up and down.

•As the effect of signals reflected from the remote control unit differ with the type of screen used, effective range and distance may decrease.

Screen

30˚	Remote Control Sensor
30˚	(rear)

•Aim the remote control unit towards the remote sensor on the front or rear of the projector. The operable distance of the remote control unit is about 7 m for direct reception. If the remote control fails to work properly, move closer to the projector.

20˚		Projector	Projector
20˚	A		30˚
B			30˚
			20˚
			20˚
Remote Control Unit			Remote Control Unit

Using as a wired Remote Control

By connecting a separately sold wired remote control via remote cable to the [REMOTE] terminal, the remote control can be used as a wired control unit.

•When connected to the remote cable, the supplied remote control’s transmitter and the projector’s sensor do not function.

•Please keep within the range of the remote cable length. Warranty is not extended to the case where an extension cord is used.

REMOTE	RS-232C OUT
	CONTROL

Wired remote control

Projector

QUICK

ALIGN.OPERATE

PC VIDEO

HIDE

DIGITAL VOLUME FREEZE ZOOM

PRESETMENU

ESCAPEENTER

(sold separately)

RM-M3010Remote Cable (sold separately) QAM0081-001 (approx. 3 m) QAM0247-001 (approx. 15 m)

❈The [ESCAPE] button on the separately sold remote control (RM-M3010) is equivalent to the [EXIT] button on the supplied remote control unit. There is no equivalent to the [H- KEYSTONE], [V-KEYSTONE] and [FOCUS] buttons found on the supplied remote con- trol.

When the remote control unit fails to work properly

•When the batteries in the remote control unit are exhausted, improper functioning will occur. Please replace with new batteries.

•When either the remote control unit or projector alone is connected to the remote cable, the item connected will not be able to work. Please check the cable connection.

•When a remote cable is connected to the projector, the supplied remote control becomes inoperable. When operating via the supplied remote control, confirm that the cable is not connected to the projector.

18