JVC TM-A210G manual Display and Selections in the SET-UP Menu Mode Setting

DISPLAY AND SELECTIONS IN THE <SET-UP MENU> MODE (SETTING)

You can set the following set-up menu items.

• H. POSITION	• CONTROL LOCK	• INPUT REMOTE
• WHITE BALANCE	• STATUS DISPLAY	• ASPECT REMOTE

Notes:

÷Parameter for H. POSITION can be set separately depending on the video input (Input A (VIDEO) or Input B (VIDEO)) selected by the input select buttons on the front panel.

Select the required video input with the input select buttons on the front panel in advance.

÷WHITE BALANCE can be set independently at 6500 or 9300 for the color temperature value. Set COLOR TEMP. to 6500 or 9300 on the <MENU> screen beforehand.

1.While pressing the MENU button, press the CHROMA/PHASE button.

CHROMA MENU The <SET-UP MENU> screen is displayed.

PHASE

2.Press the CHROMA/PHASE or CONTRAST/BRIGHT button to select the desired menu item.

CHROMA	CONTRAST	A selection mark (3) is put next to the selected item.
		Front panel	Function	Contents
		button	displayed
PHASE	BRIGHT	CHROMA/	∞	Forward selection mark (3)
		PHASE
		CONTRAST/	5	Reverse selection mark (2)
		BRIGHT

3. Press the VOLUME/SELECT buttons to set.

Front panel	Function	Contents
button	displayed
VOLUME/	+	Increase (to max. value)
	3	Forward the setting value
SELECT (+)
	CUTO	Selects CUT OFF setting screen
VOLUME/	–	Decrease (to min. value)
	2	Reverse the setting value
SELECT (–)
	DRV	Selects DRIVE setting screen

Notes:

÷To adjust the white balance, select WHITE BALANCE and press the VOLUME/SELECT (+) or (–) button to display the CUT OFF or DRIVE setting screen, then adjust each setting.

÷Press the EXIT (MENU) button to return to the <SET-UP MENU> screen.

<SET-UP MENU> screen

<Front panel buttons>

1Selection mark (3): Indicates the menu item you select.

2Menu item: Menu items you can select.

3Setting display: Indicates the

current settings (value).

4Function display: The functions of the front panel buttons (5 buttons on the left) correspond to the function displayed.

Function	Contents
displayed
∞	Forward the menu item.
5	Reverse the menu item.
–	Lower the adjustment
	value. (to the minimum)
+	Raise the adjustment
	value. (to the maximum)
3	Forward the setting value.
2	Reverse the setting value.
EXIT	Exit the <SET-UP MENU>
	screen. (release)
DRV	Selects DRIVE adjustment.
CUTO	Selects CUT OFF
	adjustment.
R·B	Adjusts red and blue
	signal level.
RGB	Adjusts red, green and
	blue signal level.
	Turns the ON-SCREEN
	display on or off. (This
DISP	function is effective only
	in the DRIVE or CUT OFF
	adjustment mode.)

ENGLISH

9