JVC TM-A210G manual Rear View, Remote INPUT, Aspect

Page 6

REAR VIEW

<Rear Panel>

pAudio A terminals [AUDIO A IN/OUT]

Input (IN) and output (OUT) terminals for the audio signal corresponding to the VIDEO A terminals e.

The output terminal is bridge-connected. IN : Audio signal input terminal

OUT : Bridge-connected audio signal output terminal

Notes:

÷For corresponding video signals, use the VIDEO A terminal e.

÷Also refer to BASIC CONNECTION EXAMPLE

on page 12.

qAudio B terminals [AUDIO B IN/OUT]

Input (IN) and output (OUT) terminals for the audio signals corresponding to the VIDEO B terminals r. The output terminal is bridge-connected.

IN : Audio signal input terminal

OUT : Bridge-connected audio signal output terminal

Notes:

÷For corresponding video signals, use the VIDEO B terminals r.

÷Also refer to BASIC CONNECTION EXAMPLE

on page 12.

wRemote terminals

[REMOTE INPUT, ASPECT]

Remote terminals for external control. Selecting VIDEO A or VIDEO B and ASPECT RATIO is available via external control. External control is set in the <SET-UP MENU> screen.

To use external control, you must build a switch cable and connect it to the REMOTE terminals.

External control

External control switch

 

 

Open circuit

Closed circuit

functions

(open)

(short)

 

 

 

 

ASPECT RATIO

4–3 (4:3)

16–9 (16:9)

 

 

 

INPUT

INPUT A

INPUT B

Note:

÷Also refer to BASIC CONNECTION EXAMPLE on page 12.

eVideo A terminals [VIDEO A IN/OUT]

Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.

IN : Video signal input terminal

OUT : Bridge-connected video signal output terminal

Notes:

÷For corresponding audio signals, use the AUDIO A terminals p.

÷Also refer to BASIC CONNECTION EXAMPLE

on page 12.

rVideo B terminals [VIDEO B IN/OUT]

Video signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.

IN : Video signal input terminal

OUT : Bridge-connected video signal output terminal

Notes:

÷For corresponding audio signals, use the AUDIO B terminals q.

÷When both VIDEO B terminals are connected (input) at the same time, the Y/C terminal has priority.

÷Also refer to BASIC CONNECTION EXAMPLE on page 12.

tVideo B (Y/C) terminals [VIDEO B Y/C IN/OUT]

Y/C (S-video) signal input (IN) and output (OUT) terminals. The output terminal is bridge-connected.

(The input signal is automatically terminated if a cable is not connected to the OUT terminals.)

The output terminal is bridge-connected.

IN : Y/C-separated (S-video) signal input terminal

OUT : Bridge-connected Y/C-separated (S-video) signal output terminal

Notes:

÷For corresponding audio signals, use the AUDIO B terminals q.

÷When both VIDEO B terminals are connected (input) at the same time, the Y/C terminal has priority.

÷Also refer to BASIC CONNECTION EXAMPLE on page 13.

ENGLISH

5

Image 6
Contents TM-A210GINSTRUCTIONS Color Video MonitorTM-A210G Safety Precautions FCC Information U.S.A. onlyContents Controls and Features Front ViewRear View Remote INPUT, AspectPower cord AC inlet ACItems VOLUME/SELECT button HOW to Handle Basic OperationsPicture Adjustment Basic OperationFront panel Function Contents Button Displayed HOW to USE the Menu FunctionsDisplay and Selection in the Menu Screen Mode Setting Menu items Purpose Setting rangeDisplay and Selections in the SET-UP Menu Mode Setting Selection mark 3 is put next to the selected itemQuit or Release the Menu HOW to USE the MenuSet-up menu items Purpose Settings ScreenHOW to Initialize the Setting Screen Display and Selections in the SET-UP Menu Reset ModeVideo B Video Connection Basic Connection ExampleVideo a Connection Example Select Input a Video Example Select Input BVideo B Y/C Connection Example Select Input B Y/C Troubleshooting Following are not malfunctionsSpecifications Pin No Signal Front ViewSide View