JVC TM-A210G manual HOW to Handle Basic Operations, Picture Adjustment, Items VOLUME/SELECT button

HOW TO HANDLE BASIC OPERATIONS

BASIC OPERATION

1. Press the POWER switch to turn on the power.

_ ON : Power turns ON. (Power indicator: lit)

— OFF : Power turns OFF. (Power indicator: unlit)

2. Press the INPUT SELECT buttons to choose input.

Select video/audio signals input to terminals on the rear panel. The lamp for the selected button lights up.

INPUT	Terminals on the rear panel
SELECT
button	Video signal input	Audio signal input
1 Input A	VIDEO A terminal	AUDIO A terminal
(VIDEO)
2Input B	VIDEO B terminal	AUDIO B terminal
(VIDEO Y/C)	VIDEO B (Y/C) terminal

Note: The Y/C (S-video) terminal has priority.

3.Press the VOLUME/SELECT buttons to adjust the speaker volume.

Press this button to display the speaker volume level on the screen.

+: The Built-in speaker volume is increased. (00 = 50)

– :The Built-in speaker volume is decreased. (50 = 00)

*Screen indication will disappear about 10 seconds after operating or immediately when you press the MENU button.

PICTURE ADJUSTMENT

1.Press select buttons corresponding to the item you want to adjust.

STATUS indication (PAL or NTSC)

PAL

About the STATUS indication
÷ With the COLOR SYSTEM setting set
to AUTO mode, when you turn on the
power or select inputs, the color
system indication appears for about
3 seconds on the screen while PAL or
NTSC signals are being detected.
It does not appear when receiving a
B/W signal or when no signal is input.
Refer to page 8 for more information	ENGLISH
about COLOR SYSTEM setting and
page 9 for more information about
STATUS indication setting.
00 ~ 50

VOLUME : 20

– +

CHROMA CONTRAST

PHASE BRIGHT

The item you select is displayed on the screen.

1Phase control	: Press the CHROMA/PHASE button
	twice.
2Chorma control	: Press the CHROMA/PHASE button
	once.

3Brightness control : Press the CONTRAST/BRIGHT button twice.

4Contrast control : Press the CONTRAST/BRIGHT button once.

–20 ~ +20

PHASE : 00

2. Adjust with the VOLUME/SELECT buttons.

Items	VOLUME/SELECT button
	–	+
PHASE	reddish	greenish
(Phase)
CHROMA	lighter	deeper
(Chroma)
BRIGHT	darker	brighter
(Brightness)
CONTRAST	lower	higher
(Contrast)

*Screen indication will disappear about 10 seconds after operating or immediately when you press the MENU button.

Notes:

÷Phase control is effective only in the NTSC color system mode.

÷Chroma control is not effective when receiving B/W or when no signal is input.

÷When CHROMA is adjusted to “–20,” the picture becomes less colorful.

÷“NO EFFECT” is displayed (for about 3 seconds) when your selected function has no effect.

7