JVC TM-1650SU manual Set-up menu items Purpose Settings, Screen

Set-up menu items

Purpose

Settings

H. POSITION

Adjusts the horizontal position of

the screen (+ : Horizontal position

–05

–04

• • • • • •

–01

00

+01

• • • • • •

+04

+05

shifts to the right/–: Horizontal

position shifts to the left)

V. POSITION

Adjusts the vertical position on the

screen (+: Vertical position moves

–05

–04

• • • • • •

–01

00

+01

• • • • • •

+04

+05

down/–: Vertical position moves up)

WHITE BALANCE

Adjusts the white balance

Selects DRIVE (DRV) or CUT OFF (CUTO) adjustment.

Screen setting is changed to the selected setting mode.

Select R/G/B buttons corresponding to the function display

to adjust.

DRIVE

R.DRIVE

Adjusts red level

–20

–19

• • • • •

–01

00

+01

• • • • •

+19

+20

B.DRIVE

Adjusts blue level

–20

–19

• • • • •

–01

00

+01

• • • • •

+19

+20

CUT OFF

R. CUT OFF

Adjusts red cut off

–20

–19

• • • • •

–01

00

+01

• • • • •

+19

+20

G. CUT OFF

Adjusts green cut off

–20

–19

• • • • •

–01

00

+01

• • • • •

+19

+20

B. CUT OFF

Adjusts blue cut off

–20

–19

• • • • •

–01

00

+01

• • • • •

+19

+20

CONTROL LOCK

Sets the operation buttons on the

OFF

ON

front panel to control lock mode

STATUS DISPLAY

Sets the status display of the color

ON

OFF

system

INPUT REMOTE

Sets external control of input

OFF

A/B

selection (INPUT A/B)

ASPECT REMOTE

Sets external control of the aspect

OFF

ON

ratio

4.To set the other set-up menu items, repeat the procedures 2 and 3.

5.Press the MENU button to quit.

Front panel	Function	Contents
button	displayed
MENU	EXIT	Quit (or Release) the <MENU>
MENU		screen

Notes:

When the CONTROL LOCK function is set to ON, pressing operation buttons on the front panel will display the message "CONTROL LOCK ON!" on the screen for about 3 seconds.

The CONTROL LOCK function is maintained even when the power is turned off.

To turn off the CONTROL LOCK function, while holding the MENU button press the PHASE button. Then set the CONTROL LOCK function to OFF. Even when the CONTROL LOCK function is set to ON, the following operations are available:

–Power Switch operation

–Volume control with the VOLUME/ SELECT buttons

–External control when INPUT REMOTE or ASPECT REMOTE is valid

–Display or disappear of the <SET-UP MENU> screen.

The STATUS DISPLAY function can be set to display (ON) or not display (OFF) the present color system when the power is turned on or the input signal is changed. Refer to page 7 for more information.

When the INPUT REMOTE function is valid (A/B), pressing the Input A, Input B or Input RGB/COMPO. buttons will display the message "REMOTE ON!" on the screen for about 3 seconds.

The INPUT REMOTE function is valid (A/B) after quitting the <SET-UP MENU> screen.

11