HOW TO HANDLE BASIC OPERATIONS
BASIC OPERATION
1. Press the POWER switch to turn on the power.
gON : Power turns ON. (Power indicator: lit)
STATUS indication (PAL or NTSC)
PAL
ON
OFF
POWER
GOFF : Power turns OFF. (Power indicator: unlit)
2. Press the INPUT SELECT button to choose input.
RGB/ |
|
| B |
|
|
|
| A |
|
|
|
|
|
| |||
COMPO. |
|
|
|
|
|
|
|
|
INPUT SELECT
Select video/audio signals input to terminals on the rear panel. The selected INPUT SELECT indicator lights in green.
INPUT | Terminals on the rear panel | ||
SELECT |
|
| |
button | Video signal input | Audio signal input | |
|
|
| |
1 Input A | VIDEO A terminal | AUDIO A terminal | |
(VIDEO) | |||
|
| ||
|
|
| |
2 Input B | VIDEO B terminal |
| |
(VIDEO) |
| ||
| AUDIO B terminal | ||
|
| ||
3 Input B | VIDEO B (Y/C) terminal | ||
| |||
(Y/C) |
| ||
|
| ||
|
|
| |
4 Input | RGB/COMPO. terminal | AUDIO RGB/COMPO. | |
RGB/ | |||
(RGB/Y, | terminal | ||
COMPO. | |||
|
| ||
|
|
| |
* RGB or COMPONENT signals can be selected in the <MENU> screen.
About the STATUS indication
With the COLOR SYSTEM setting set to AUTO mode, when you turn on the power or select inputs, the color system indication appears for about
3 seconds on the screen while PAL or NTSC signals are being detected.
It does not appear when receiving a B/W signal or when no signal is input. Refer to page 8 for more information about COLOR SYSTEM setting and page 10 for more information about STATUS indication setting.
3. Press the VOLUME/SELECT button to adjust the speaker volume.
00 ~ 50
– +
Press this button to display the speaker volume level on the screen.
+ : The
| VOLUME/SELECT |
| |
|
| ||
|
|
| |
|
|
| * Screen indication will disappear about 10 seconds after |
|
|
| operating. |
PICTURE ADJUSTMENT
1. Press select button corresponding to the item you
want to adjust. | The item you select is displayed on the screen. | |||
| 1 | PHASE ( | ) | : Phase control |
| 2 | CHROMA ( | ) | : Chroma control |
PHASE CHROMA BRIGHT CONTRAST 3 BRIGHT ( | ) | : Brightness control | ||
| 4 | CONTRAST ( | ) : Contrast control | |
2. Adjust with the VOLUME/SELECT button.
VOLUME : 20
– | + |
PHASE : 00
– +
VOLUME/SELECT
Items | VOLUME/SELECT button | ||
|
| ||
| – | + | |
|
|
| |
PHASE | reddish | greenish | |
(Phase) | |||
|
| ||
|
|
| |
CHROMA | lighter | deeper | |
(Chroma) | |||
|
| ||
|
|
| |
BRIGHT | darker | brighter | |
(Brightness) | |||
|
| ||
|
|
| |
CONTRAST | lower | higher | |
(Contrast) | |||
|
| ||
|
|
| |
* Screen indication will disappear about 10 seconds after operating.
Notes:
Phase control is effective only in the NTSC color system mode.
Chroma control is not effective when receiving B/W or when no signal is input. (Except when a component signal is input.)
When CHROMA is adjusted to “– 40,” the picture becomes less colorful. "NO EFFECT" is displayed (for about 3 seconds) when your selected function has no effect.
7