JVC GM-V42S, GM-V42PCEG, GM-V42PCEB manual AV connections, DVD player, etc, Personal computer

Connections (Continued)

AV connections

These terminals are not available for GM-V42PCE, GM-V42PCEG and GM-V42PCEB.

To use them, you need to install video input unit (IF-C42P1G), which is separately purchased.

	VCR 1	VCR 2	DVD player, etc.
(used as the playback source)		(used as the playback source)	(used as the playback source)

To audio output

Tovideo output Toaudio output

Tovideo output ToS- videooutput Toaudio output

To video output

AUDIO	VIDEO	AUDIO	VIDEO		AUDIO			VIDEO
L/MONO		L/MONO			L/MONO
R IN	OUT	R	IN	Y/C IN	R	Y/G	Pb/B	Pr/R HD/Cs VD
VIDEO A			VIDEO B			COMPONENT/RGB B

When connecting another PC to the COMPONENT/RGB B terminals, set the “RGB/COMPO.” setting to “RGB” (see page 22).

Personal computer

(used as the playback source)

To audio output

To G output

To B output

To R output

To HD/Cs output

To VD output

Notes:

•You can connect another VCR or Monitor to the VIDEO A OUT terminal. However, when connecting a VCR to the VIDEO A terminals, do not connect both IN and OUT terminals to the same VCR.

•When connecting a VCR to the VIDEO B terminals, you can use either the video or S-video terminals. If the both terminals are used, S-video terminal will have priority.

12