JVC GM-V42PCEG, GM-V42S, GM-V42PCEB manual Setting the Receivable Signal Types

Changing the Aspect Ratio Setting the Receivable Signal Types

The setting adjusted applies to all inputs.

•You can change the aspect ratio by pressing ASPECT. (See page 15.)

1 Press MENU/EXIT (or MENU on the Monitor) to display the Main Menu.

		M A I N M E N U
Cursor (3)	P I C T U R E	A D J .
	S I Z E / P O S I T I O N A D J .
	F U N C T I O N S E L E C T
	S T A T U S D I S P L A Y
	E N T E R :	S E L E C T :	E X I T :
				M E N U

2 Press 5/∞ to move the cursor (3) to

“FUNCTION SELECT.”

3 Press 3 to display the Function

Selection Menu.

F U N C T I O N S E L E C T

	C O L O R T E M P .		: H I G H *
	A S P E C T		: P A N O R A M I C
	S I G N A L M O D E		: A U T O
	R G B / C O M P O .		: R G B
	S Y N C T E R M .		: H I G H
	r e s e t
A D J U S T :		S E L E C T :		E X I T :
					M E N U

*1 *2 *3

4 Press 5/∞ to move the cursor (3) to “ASPECT.”

5 Press 2/3 to select an aspect ratio you want.

Each time you press the button, the aspect ratio changes as follows:

REGULAR FULL

PANORAMIC ZOOM

*For detailed information on these aspect ratios, see page 15.

6 Press MENU/EXIT (or MENU on the Monitor) twice to exit from the menu operations.

Note:

•When one of the following signals is being input, you cannot select the aspect ratio you want.

■1080/50i, 1080/60i, 1035/60i or 720/60p signal through the COMPONENT/RGB B input terminals

Aspect ratio is fixed to FULL (“ASPECT” will not appear on the display).

■When any signal other than RGB15K-60 and RGB15K-50 through the RGB A or COMPONENT/RGB B input terminals You can select only REGULAR and FULL.

You can set the receivable signal types. Normally, select “AUTO.”

A common setting will apply to both the VIDEO A input and the VIDEO B input, and a different setting will apply to the COMPONENT input.

1 Press MENU/EXIT (or MENU on the Monitor) to display the Main Menu.

		M A I N M E N U
Cursor (3)	P I C T U R E	A D J .
	S I Z E / P O S I T I O N A D J .
	F U N C T I O N S E L E C T
	S T A T U S D I S P L A Y
	E N T E R :	S E L E C T :	E X I T :
				M E N U

2 Press 5/∞ to move the cursor (3) to

“FUNCTION SELECT.”

3 Press 3 to display the Function

Selection Menu.

F U N C T I O N S E L E C T

				C O L O R T E M P .		: H I G H *
				A S P E C T		: P A N O R A M I C
				S I G N A L M O D E		: A U T O
				R G B / C O M P O .		: R G B
				S Y N C T E R M .		: H I G H
				r e s e t
			A D J U S T :		S E L E C T :		E X I T :
								M E N U
*1	*2	*3

4 Press 5/∞ to move the cursor (3) to “SIGNAL MODE.”

5 Press 2/3 to select the receivable video signal type.

Each time you press the button, the receivable video signal type changes as follows:

•When VIDEO A or VIDEO B input is selected:

AUTO NTSC PAL

PAL60 N4.43 SECAM

(NTSC4.43)

•When COMPONENT input is selected:

AUTO 480i 576i

1080i 720p480p (1035i)*

*Changes according to the “HD SIGNAL MODE” setting (see page 27).

6 Press MENU/EXIT (or MENU on the Monitor) twice to exit the menu operations.

ENGLISH

21