STATUS DISPLAY | Sets if you want the input terminal and the type of signal to be indicated on the screen just after |
| inputs are switched. (See page 25.) |
CONTROL LOCK | Sets the Monitor so that it cannot be operated with the buttons on itself. (See page 26.) |
REMOTE SWITCH | Set the selectable input terminals when controlling the Monitor with the external control unit (See |
| page 27.) |
HD SIGNAL MODE | Select the |
WHITE BALANCE | Adjusts R GAIN, G GAIN and B GAIN finely each for “HIGH” and “LOW” settings of the color |
| temperature. (See page 19.) |
TIMER | Sets the clock and the Power On/Off Timer. (See page 28.) |
PIXEL SHIFT | Sets a screen saver. (See page 29.) |
POWER SAVE | Sets the power save function. (See page 29.) |
| Use to reverse the color of the still picture to prevent its afterimage from being left on the screen. |
| (See page 30.) |
REFRESH | Use to eliminate afterimages on the screen. (See page 31.) |
reset | Resets the Setup Menu settings to defaults. (See page 33.) |
all reset | Resets the all menu settings and adjustments to defaults. (See page 33.) |
HOUR METER | Use to confirm the hours of use. (See page 25.) |
MODEL NAME | Use to confirm your model name. (See page 25.) |
ENGLISH
37