JVC GD-V422U, GD V502U Adjusting Picture POSITION/SIZE, Helpful Hint N / Normalize Normalization

PLASMA DISPLAY

Adjusting PICTURE POSITION/SIZE

Adjusting screen

PICTURE

1 POS. /SIZE

2

Press to display the PICTURE POS./ SIZE menu.

Press to select H-POS / H-SIZE / V-POS /

V-SIZE / CLOCK PHASE.

		INPUT
	SURROUND
		VOL
N		R
PICTURE	SOUND	SET UP
MULTI		ZOOM
PIP	SWAP SELECT MOVE
PICTURE
POS. /SIZE		ASPECT
PC		OFF TIMER

During “VIDEO (S VIDEO)” and	During “RGB” and “PC”
“COMPONENT” input signal.	input signal.

PICTURE POS./SIZE		PICTURE POS./SIZE
NORMALIZE	NORMAL	NORMALIZE	NORMAL
H-POS		H-POS
H-SIZE		H-SIZE
V-POS		V-POS
V-SIZE		V-SIZE
		CLOCK PHASE

3 Press to adjust POS./ SIZE.

R

Press to exit from adjust mode.

Notes:

(1)Adjustment details are memorized separately for different input signal formats (Adjustments for component

signals are memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i

· 50i · 24p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB / PC signals are memorized for each frequency.)

(2)If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the PICTURE POS./ SIZE function.

	When the Position Left “	” button is pressed.	When the Position Right “	” button is pressed.
H-POS
	When the Position Left “	” button is pressed.	When the Position Right “	” button is pressed.
H-SIZE
	When the Position Left “	” button is pressed.	When the Position Right “	” button is pressed.
V-POS
	When the Position Left “	” button is pressed.	When the Position Right “	” button is pressed.
V-SIZE
CLOCK PHASE	Flickering and distortion can be eliminated by using the Position Left “ ” or Right “ ” button to
(RGB / PC in Mode)	carry out adjustment.

Note: Using the size adjustment function to display a picture with the aspect ratio changed from the original for the purpose of the public display or commercial gain may infringe on copyright laws.

Helpful Hint ( N / NORMALIZE Normalization)

While the PICTURE POS./SIZE display is active, if either the N button on the remote control is pressed at any time or the (ACTION button) is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

20