JVC GV-HT1U manual Safety Precautions

Page 2

2EN

Dear Customer,

Thank you for purchasing this Printer. Before use, please read the safety information and precautions contained in the following pages to ensure safe use of this product.

Using This Instruction Manual

•All major sections and subsections are listed in the Table Of Contents ( pg. 8, 9).

•Notes appear after most subsections. Be sure to read these as well.

•Basic and advanced features/operation are separated for easier reference.

It is recommended that you . . .

... refer to “Controls, Indicators and Connec- tors” ( pgs. 12 – 15) and familiarize yourself with button locations, etc. before use.

... read thoroughly the Safety Precautions and Safety Instructions that follow. They contain extremely important information regarding the safe use of your new Printer.

You are recommended to carefully read the cautions on page 5 before use.

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTIONS:

To prevent shock, do not open the cabinet. No user serviceable parts inside. Refer servicing to qualified personnel.

When you are not using the AC Power Adapter/Battery charger for a long period of time, it is recommended that you disconnect the power cord from AC outlet.

The AA-V68U AC Power Adapter should be used with:

AC 120 V‘, 60 Hz in the USA and Canada, AC 110 – 240 V‘, 50/60 Hz in other countries.

CAUTION (applies to the AA-V68U)

TO PREVENT ELECTRIC SHOCK MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

ATTENTION (s’applique à l’AA-V68U)

POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

NOTES:

The rating plate (serial number plate) is on the bottom and/or the back of the main unit.

The rating plate (serial number plate) of the AC Power Adapter/Charger is on its bottom.

SAFETY

PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK.

DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT

Never use any AC Power Adapter/ Battery Charger other than the one provided with this printer.

If you lose the provided AC Power Adapter/Battery Charger or if it malfunc- tions, please consult your nearest JVC service dealer.

This printer is designed to be used with NTSC- type colour television signals. It cannot be used for monitoring with a television of a different standard. Use the BN-V607 battery pack and, to recharge it, the multi-voltage AC Power Adapter/Charger. (An appropriate conversion adapter may be necessary to accommodate different designs of AC outlets in different countries.)

Image 2
Contents GV-HT1 Safety Precautions Important Product Safety Instructions USE About Thermal Heads Battery Packs Serious malfunctioningSample Image Data CopyrightSample Images Source of ImagesEasy to read LCD Display Multipix EN Contents Blank Paper Sheet Set DC cordInk cassette MEMORY/SELECT Button Power ButtonMenu Button PRINT/SET ButtonInk cassette compartment Battery compartmentPaper compartment door switch Paper out/manual feed slot14 EN Mode overviewSee Mode overview Switch monitor display Enter print modeAdjust brightness or tint Desired ActionVideo Source 16 ENPrinting from source with video output terminals Printing from a Digital Still Camera with IrTran-P Printer IrDA receiverBattery BN-V607 Charging the batteryInsert the Battery Close the Battery COMPART- Ment LID Loading the Battery Using AC powerOpen the Battery COMPART- Ment LID Supply AC PowerInstalling the Ink cassette 20 ENAbout blank Paper sheet Set optional Load Blank Paper Loading Blank PaperOpendoorpaper Compartment Closedoor the Paper CompartmentPreparation EN Press the SET Button 24 ENPress the Menu Button Press the Menu Button Twice to Confirm the EntryPress the Print Button 26 EN IrDA receiving window PreparationsPrinter Starts Receiving the Image 28 EN Miscellaneo US Printin G OperationsFrame 30 EN Printing Multiple Images on the Same Paper Multi PrintOn the LCD panel. Then the printer icon Month 32 ENCombining Image and Calendar Calendar Printing He message, Please wait ... is displayed on Printing Using Special Effects Special Effects 34 ENOn the LCD panel. Then the printer icon Preparation 36 ENManual Feed Insert Printing Paper in Paper OUT/MANUAL Feed Slot Paper38 EN Printing Reversed Images Mirror ImagesAdjustments Adjusting Image Quality Adjustments before PrintingPress the Menu Button Twice to Confrim the Entry Saving Energy Power Save40 EN Mem. mode appears 42 EN Meaning of Messages Displayed on the LCD panelCannot be adjusted Mode is something other than video Image Printer. This is normal and not a failureTurn OFF the Power and Turn IT Back on Again Press the Select ButtonTo COM port Toprintedtransmit the Image to beFor Windows PC jack RS-232C PC Connection Cable Video PrinterResolution Power supplyPower consumption Processing time ConnectorsIndex EN for Servicing O nly in U.S.A Warranty Only in U.S.A EN Memo Memo EN GV-HT1