JVC GV-HT1U manual Battery Packs, Serious malfunctioning

Page 6

6EN

Battery Packs

The supplied battery pack is a lithium-ion battery. Before using the supplied battery pack or an optional battery pack, be

sure to read the following

cautions:Terminals

<Depleting the batteries completely>

1.Turn on the power.

2.Set “power save” to “off” and remove the batteries when the power is automatically turned off.

1.To avoid hazard . . .

.... do not burn.

.... do not short-circuit the terminals.

.... do not modify or disassemble.

.... do not expose the battery to temperatures exceeding 60°C (140°F), as this may cause the battery to overheat, explode or catch fire.

.... use only specified chargers.

2.To prevent damage and prolong service life . . .

.... do not subject to unnecessary shock.

.... charge in an environment where tempera- tures are within the tolerances shown in the chart below. This is a chemical reaction type battery—cooler temperatures impede chemical reaction, while warmer tempera- tures can prevent complete charging.

.... store in a cool, dry place. Extended exposure

to high temperatures will increase natural discharge and shorten service life.

.... fully charge and then fully discharge the battery once a year when storing the battery pack over a long period time.

.... remove from charger or powered unit when not in use, as some machines use current even when switched off.

NOTES:

It is normal for the battery pack to be warm after charging, or after use.

Temperature Range Specifications

Charging

10°C to 35°C (50°F to 95°F)

Operation

0°C to 40°C (32°F to 104°F)

Storage

–10°C to 30°C (14°F to 86°F)

Recharging time is based on room temperature of 20°C (68°F).

The lower the temperature, the longer recharging takes.

CAUTIONS

About Batteries

DANGER! Do not attempt to take the batteries apart, or expose them to flame or excessive heat, as there is a risk of fire or explosion.

WARNING! Do not allow the battery terminals, or the battery itself, to come in contact with metals, as this can result in a short circuit and possibly start a fire.

The Benefits Of Lithium-Ion Batteries

Lithium-ion battery packs are small but possess a large power capacity. However, when the battery pack becomes cool in an environment subject to cold temperatures (below 10°C (50˚F)), the battery pack has a characteristic that its usage time becomes shorter and may cease to function. If this happens, place the battery pack in your pocket or other warm, protected place for a short time, then re-attach it to the camcorder. As long as the battery pack itself is not cold, it should not affect perform- ance.

(If you’re using some kind of heating pad, make sure the battery pack does not come in direct contact with the pad.)

Lithium-ion is vulnerable in colder temperatures.

Serious malfunctioning

If malfunctioning occurs, stop using the unit immediately and consult your local JVC dealer.

The printer is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from function- ing properly. In such cases, first disconnect its power supply unit (battery pack, AC Power Adapter/Battery Charger, etc.) and then re- connect it and proceed as usual from the beginning.

Image 6
Contents GV-HT1 Safety Precautions Important Product Safety Instructions USE About Thermal Heads Battery Packs Serious malfunctioningSample Image Data CopyrightSample Images Source of ImagesEasy to read LCD Display Multipix EN Contents DC cord Ink cassetteBlank Paper Sheet Set MEMORY/SELECT Button Power ButtonMenu Button PRINT/SET ButtonInk cassette compartment Battery compartmentPaper compartment door switch Paper out/manual feed slotMode overview See Mode overview14 EN Switch monitor display Enter print modeAdjust brightness or tint Desired Action16 EN Printing from source with video output terminalsVideo Source Printing from a Digital Still Camera with IrTran-P Printer IrDA receiverCharging the battery Insert the BatteryBattery BN-V607 Close the Battery COMPART- Ment LID Loading the Battery Using AC powerOpen the Battery COMPART- Ment LID Supply AC PowerInstalling the Ink cassette 20 ENAbout blank Paper sheet Set optional Load Blank Paper Loading Blank PaperOpendoorpaper Compartment Closedoor the Paper CompartmentPreparation EN Press the SET Button 24 ENPress the Menu Button Press the Menu Button Twice to Confirm the EntryPress the Print Button 26 EN IrDA receiving window PreparationsPrinter Starts Receiving the Image 28 EN Miscellaneo US Printin G OperationsFrame 30 EN Printing Multiple Images on the Same Paper Multi PrintOn the LCD panel. Then the printer icon 32 EN Combining Image and Calendar Calendar PrintingMonth He message, Please wait ... is displayed on Printing Using Special Effects Special Effects 34 ENOn the LCD panel. Then the printer icon 36 EN Manual FeedPreparation Insert Printing Paper in Paper OUT/MANUAL Feed Slot Paper38 EN Printing Reversed Images Mirror ImagesAdjustments Adjusting Image Quality Adjustments before PrintingSaving Energy Power Save 40 ENPress the Menu Button Twice to Confrim the Entry Mem. mode appears 42 EN Meaning of Messages Displayed on the LCD panelCannot be adjusted Mode is something other than video Image Printer. This is normal and not a failureTurn OFF the Power and Turn IT Back on Again Press the Select ButtonTo COM port Toprintedtransmit the Image to beFor Windows PC jack RS-232C PC Connection Cable Video PrinterResolution Power supplyPower consumption Processing time ConnectorsIndex EN for Servicing O nly in U.S.A Warranty Only in U.S.A EN Memo Memo EN GV-HT1