CAUTIONS 
EN 5
Exercise caution when moving the printer. If you drop the unit, do not attempt to use it. If during use you notice that the cabinet
is damaged, shut the printer down, remove
power supply unit it and contact your JVC dealer.
Use of the printer under these conditions can lead to fire or electric shock.
DO NOT place heavy objects on the AC power adapters cords, or leave the cord near any heat- generating appliance, as this can damage the cords. Avoid excessive pulling or twisting of the power cords. If the power cords
becomes cut or otherwise damaged, contact your JVC dealer. When unplugging the
AC power adapter, DO NOT pull on the cord. Hold the plug itself and remove it from
the AC outlet. Use of the printer with a damaged power cord can lead to fire, electric shock and unit malfunctions.
DO NOT remove the cover and attempt to repair or modify the printer. There are
unit, and the risk of electric shock and unit malfunctions exists. If a problem occurs, contact
your JVC dealer.
Illustrations of this printer may differ slightly from production models.
ABOUT THERMAL HEADS
•The thermal heads, necessary for printing, are located within the unit. The heads can become extremely warm. To prevent possible burns and injuries, do not touch the thermal heads.
•When the printer is used for extended periods, the thermal heads experience wear and tear just like VCR heads. As the thermal heads become worn, print quality will gradually decrease. When you notice a decline in quality, it is possible that the heads may need to be replaced. Consult your JVC dealer.
DUST
Due to dust or lint adhering to print paper, or to extreme variations in temperature, a small degree of colour smearing or lines may be visible in prints.
Failure to heed the following precautions may result in damage to the printer.
1.DO NOT place the printer . . .
... in an environment prone to extreme temperatures or humidity.
... in direct sunlight.
... in a dusty environment.
... in an environment where strong magnetic fields are generated.
... on a surface that is unstable or subject to vibration.
2.DO NOT place heavy objects on the printer.
3.DO NOT place anything which might spill on top of the printer.
4.AVOID violent shocks to the printer during transport.
CAUTION:
Changes or modifications not approved by JVC could void user’s authority to operate the equipment.