Operating the Setting Menu

Making Basic Settings

■Projector’s buttons

SETTING button

MERGENCY AV	RGB	SETTING	QUICK

			ALIGN.

QUICK ALIGN. button

■Setting menu

S E T T I N G
T R A C K I N G		1 0
P H A S E		0
H . P O S .		0
V . P O S .		0
F O C U S	–	+
Z O O M	W	T
S I F T L E N S

Adjustment • setting level

In this section, we are making basic picture adjustments which should be performed after installation (connection).

Notes

•The setting menu is displayed when you press the SETTING button on the projector. After the menu is displayed, you can make settings (adjustments).

•If the projector’s position or connections have been changed, adjustments and settings should be performed again.

•After adjustments, if further picture adjustment is necessary depending on the equipment connected, use the main menu (pages 33 to 58) to make detailed settings and adjustments.

•For computer-related inputs, use of the quick alignment function allows automatic adjustment of TRACKING, PHASE, H. POS. and V. POS. (See pages 30, 36 and 37).

1 Press the SETTING button of the projector.

• The setting menu is displayed on the screen.

2 Press the SETTING button to select the desired item.

•The selected item is shown in magenta color. Each time you press the button, the selected item changes as follows:

TRACKING PHASE H. POS. V. POS.

Menu clearing SIFT LENS ZOOM FOCUS

Memo

To select items using the remote control unit:

Items can be selected using the cursor buttons 5 (backward) or ∞(forward) on the remote control unit. In this case, menu clearing in the above order is not available. The selection changes from SIFT

LENS to TRACKING directly.

Description of adjustment and setting items

TRACKING	: If wide vertical stripes appear on the screen,
	adjust the lateral video size and display area
	so that they disappear. (–255 ↔ 0 ↔ +255)
PHASE	: If characters on the screen flicker or become
	dim, adjust so they become clear.
	(–127 ↔ 0 ↔ +127)
H. POS.	: If the screen position is displaced to the right
	or left, adjust the horizontal position of the
	screen. (–255 ↔ 0 ↔ +255)
V. POS.	: If the screen position is displaced upward or
	downward, adjust the vertical position of the
	screen. (–120 ↔ 0 ↔ +120)
FOCUS	: Adjust the focus of video picture.
	–: Focuses on near points.
	+: Focuses on farther points.
ZOOM	: Adjust the screen size (angle of view).
	T : Becomes smaller.
	W : Becomes larger.
SIFT LENS	: Adjusts the projected screen position.
	∞: Moves it down.
	5: Moves it up.

3 Adjust and set the selected item using the QUICK ALIGN. buttons or .

•To adjust and set multiple items, repeat steps 2 and 3.

•To reset the adjustment value of the selected item (TRACKING, PHASE, H. POS. or V. POS.) to the factory-set value, press the remote control’s PRESET button. This button does not work for focus and zoom.

Memo

To adjust and set items using the remote control unit:

Items can be adjusted or set by pressing the MENU/ENTER button toward the 2 or 3 mark on the remote control.

4 Clear the setting menu by pressing the SETTING button repeatedly.

Memo

To clear the setting menu using the remote control unit:

You can also clear the setting menu by pressing the PAGE BACK button on the remote control unit.