09Tuner Setup
Selecting digital closed captions
Use the following procedure to select digital closed captions: Service 1 to 6.
1Press HOME MENU.
2Select “Tuner Setup”. (
/
then ENTER)
3Select “Closed Captions”. (
/
then ENTER)
4Select “Digital Settings”. (
/
then ENTER)
5Select “Digital Service”. (
/
then ENTER)
6Select the desired closed caption. (
/
then ENTER)
| Closed Captions | Digital Settings | Digital Service |
|
|
|
|
| Service 1 |
| xxxxxxxxxxxxxxxxxxxxx |
| Digital Settings | Digital Service | Service 2 |
| |
| Service 3 |
| xxxxxxxxxxxxxxxxxxxxx | ||
|
|
| Service 4 |
| xxxxxxxxxxxxxxxxxxxxx |
|
|
| Service 5 |
|
|
|
|
|
|
| Home Menu Exit |
|
|
|
|
|
|
•The factory default is “Service 1”.
7 Press HOME MENU to exit the menu.
NOTE
•When available, the Primary Caption Service is usually offered for Service 1, and the Secondary Language Service is usually offered for Service 2.
Selecting digital closed caption parameters
Use the following procedure to change digital closed captions parameters such as font size, font type, foreground and background colors.
1Press HOME MENU.
2Select “Tuner Setup”. (
/
then ENTER)
3Select “Closed Captions”. (
/
then ENTER)
4Select “Digital Settings”. (
/
then ENTER)
5Select “Font Size”, “Font”, or any other item. (
/
then
ENTER)
6Select the desired parameter. (
/
then ENTER)
| Closed Captions | Digital Settings | Font Size |
|
|
|
|
| Large |
| xxxxxxxxxxxxxxxxxxxxx |
| Digital Settings | Font Size | Standard |
| |
| Small |
| xxxxxxxxxxxxxxxxxxxxx | ||
|
|
|
|
| xxxxxxxxxxxxxxxxxxxxx |
|
|
|
|
|
|
|
|
|
|
| Home Menu Exit |
|
|
|
|
|
|
7Repeat steps 5 and 6 as necessary. (
, 
/
)
8Press HOME MENU to exit the menu.
The following table shows the available parameters for each item.
Item | Selection |
Font Size | Auto/ Large/ Standard/ Small |
|
|
Font1 | Auto/ Font 1/ Font 2/ Font 3/ Font 4/ Font 5/ Font 6/ |
| Font 7 |
|
|
Font Color | Auto/ Black/ White/ Red/ Green/ Blue/ Yellow/ |
| Magenta/ Cyan |
|
|
Font Opacity | Auto/ Solid/ Transparent/ Translucent/Flashing |
|
|
Background | Auto/ Black/ White/ Red/ Green/ Blue/ Yellow/ |
Color | Magenta/ Cyan |
|
|
Background | Auto/ Solid/ Transparent/ Translucent |
Opacity |
|
1Font 1 (monospaced with serifs)/ Font 2 (proportionally spaced with serifs)/ Font 3 (monospaced without serifs)/ Font 4 (proportionally spaced without ser- ifs)/ Font 5 (casual font)/ Font 6 (cursive font)/ Font 7 (small capitals font)
With “Auto” selected, parameters specified by the provider are used. If not specified by the provider, the bolded default parameters are used. Selected parameters override any other parameters, including those from the provider.
Clock Setting
With “Auto Set” selected for Clock Setting, the system acquires and sets the time automatically. You can also manually set the time. If power is lost (unplugged or power outage), the set time is cleared.
1Press HOME MENU.
2Select “Tuner Setup”. (
/
then ENTER)
3Select “Clock”. (
/
then ENTER)
4Select “Time Zone”. (
/
then ENTER)
5Select a time zone for your area. (
/
then ENTER)
| Clock | Time Zone |
|
|
|
| Atlantic | Current Time: | xxxxxxxxxxxxxxxxxxxxx |
| Time Zone | 9:55 pm EDT | ||
| Eastern | xxxxxxxxxxxxxxxxxxxxx | ||
| Monday | |||
|
| Central | xxxxxxxxxxxxxxxxxxxxx | |
|
| 05/17/04 | ||
|
| Mountain |
| |
|
|
|
| Home Menu Exit |
|
|
|
|
|
6Select “D.S.T.”. (
, 
/
, then ENTER)
7Select “Applies” or “Does Not Apply”. (
/
then ENTER)
• Set this option if your area uses Daylight Savings Time.
| Clock | Daylight Savings Time |
|
|
|
|
| Current Time: | xxxxxxxxxxxxxxxxxxxxx |
| D.S.T. |
| 9:56 pm EDT | |
| Applies | xxxxxxxxxxxxxxxxxxxxx | ||
| Monday | |||
|
| Does Not Apply | xxxxxxxxxxxxxxxxxxxxx | |
|
| 05/17/04 | ||
|
|
|
| |
|
|
|
| Home Menu Exit |
|
|
|
|
|
8 Select “Auto/Manual Set”. (
, 
/
, then ENTER)
9 Select “Auto Set” or “Manual Set”. (
/
then ENTER)
42
En
