Pioneer PRO 940HD, PRO 1140HD manual Basic Operations, Turning on the power, Turning off the power

06Basic Operations

Turning on the power

(from Standby)

1Press aPOWER on the Plasma Display if the POWER ON and STANDBY indicators are off.

•The STANDBY indicator on the Plasma Display lights up red.

2Press TV aon the remote control unit or STANDBY/ON on the Plasma Display to turn the system on.

•The POWER ON indicator on the Plasma Display lights up blue.

Turning off the power

(to Standby)

1Press TV aon the remote control unit or STANDBY/ON on the Plasma Display.

•The system enters the standby mode and the image on the screen disappears.

•The STANDBY indicator lights up red.

•This allows the system to automatically receive digital TV program information while in Standby.

NOTE

•If you are not going to use this system for a long period of time, unplug the power cord from the power outlet.

Plasma Display status indicators

The table below shows the operational status of the Plasma Display Panel. Panel indicators reflect the current status of the Plasma Display.

Indicator		System Status
Status
POWER ON	STANDBY
		The Plasma Display has been unplugged
		or the Plasma Display is off.
		Power to the system is on.
		The system is in Standby.

For other than the above, see “Troubleshooting”on page 101.

CAUTION

•If the POWER ON and STANDBY indicators are off, the system cannot be powered ON. Pressing the TV aor STANDBY/ON button has no effect. Press POWER then wait for the Standby indicator to light (red).

•The Plasma Display System consumes some power as long as the plug is inserted into an outlet.

24

Plasma Display (PRO-1140HD)

POWER button

POWER ON indicator

STANDBY indicator

(PRO-940HD)

POWER ON indicator

STANDBY

indicator

POWER button

Viewed from below of the display (left).

STANDBY/ON

button

(Right side view)

En