Pioneer PRO 940HD, PRO 1140HD Screen 8 Is a VCR Connected?, Screen 9 VCR Configuration Diagram

07TV Guide On Screen™ System Setup

Screen 8: Is a VCR Connected?

•If you select “Yes”, you see Screen 9.

•If you select “No”, you see Screen 14.

Screen 9: VCR Configuration Diagram

•This screen shows the correct way to install the G-LINK cable from the back of the device to the recording device. Make sure the G-LINK cable is properly installed.

•Press ENTER to advance to Screen 10.

Screen 10: VCR Brand Name

•Press / to select the brand of the recording device.

•Press ENTER to advance to Screen 11.

32

Screen 11: VCR Preparation

•Follow the on-screen instructions then press ENTER to display Screen 12.

Screen 12: VCR Code Testing

• When testing is done, Screen 13 displays automatically.

Screen 13: Did your VCR stop playing?

•If you select “Yes”, you see Screen 14.

•If you select “No”, a different code is tested from Screen 12.

NOTE

•Many VCRs require testing of more than one code to ensure proper operation with the TV Guide On Screen™ system.

If you select “Test this code again”, the same code from Screen 12 is sent again.

En