Pioneer PRO 1140HD manual Power Control, Front Surround, Energy Save, No Signal off AV mode only

Adjustments and Settings 11

FOCUS

Focus shifts the sound-source direction (sound image) upward and produces clear sound contours.

1Press HOME MENU.

2Select “Sound”. (/ then ENTER)

3Select “FOCUS”. (/)

4Select the desired parameter. (/)

Item	Description
Off	Deactivates FOCUS
On	Activates FOCUS

5Press HOME MENU again to exit the menu.

Front Surround

Front Surround provides three-dimensional sound effects and/ or a deep, rich bass.

1Press HOME MENU.

2Select “Sound”. (/ then ENTER)

3Select “Front Surround”. (/)

4Select the desired parameter. (/)

Item	Description
Off	Deactivates both SRS and TruBass
SRS	Reproduces highly effective three-dimensional sound
TruBass	Provides deep, rich bass using a new technology
(factory default)
TruBass + SRS	Provides both TruBass and SRS effects

5Press HOME MENU again to exit the menu.

NOTE

•(WOW) FOCUS is on and TruBass + SRS is selected for Front Surround

• trademark of SRS Labs, Inc.

•WOW technology is incorporated under license from SRS Labs, Inc.

Power Control

Power Control provides convenient power saving options.

Energy Save

There are three Energy Save modes to reduce power consumption.

1Press HOME MENU.

2Select “Power Control”. (/ then ENTER)

3Select “Energy Save”. (/ then ENTER)

4Select “Save1”, “Save2” or “Picture Off”. (/ then

ENTER)

Item	Description
Standard	Maximum picture brightness; may increase glass
	panel buzzing
Save1	Slightly reduced power consumption and brightness;
	optimal setting for most uses
Save2	Lowest power consumption; slightly decreased
	brightness
Picture Off	Deactivates the screen to save power. To restore the
	screen display, press any button other than VOL +/–
	and MUTING.
	This setting is not memorized by the system.

5Press HOME MENU again to exit the menu.

NOTE

•When the signal is coming from a PC, use the Home menu to set this option.

No Signal off (AV mode only)

The system automatically enters Standby if no signal is received for 15 minutes.

1Press HOME MENU.

2Select “Power Control”. (/ then ENTER)

3Select “No Signal off”. (/ then ENTER)

4Select “Enable”. (/ then ENTER)

Item	Description
Disable	Does not place the system into Standby
(factory default)
Enable	Places the system into Standby if no signal is
	received for 15 minutes

English

5Press HOME MENU again to exit the menu.

NOTE

•Five minutes before the system is placed into Standby, a message appears as each minute counts down.

•The system may not enter Standby if the TV program signal has a high video noise level.

61

En