Pioneer PRO 1140HD, PRO 940HD manual Tuner Setup, Setting up TV channels

Tuner Setup

Setting up TV channels

This section describes how to search and set up TV channels. Unless you set up TV channels using Auto Channel Preset, you may not be able to tune in all available channels.

Using Auto Channel Preset

Auto Channel Preset automatically searches and sets up TV channels. Press ENTER after each selection.

1Press HOME MENU.

2Select “Tuner Setup”. (/ then ENTER)

3Select “Channel Setup”. (/ then ENTER)

4Select “Ant. A” or “Ant. B”. (/ then ENTER)

5Select “Auto Channel Preset”. (/ then ENTER)

6Select “Air” or “Cable”. (/ then ENTER)

	Channel Setup	Ant. A	Auto Ch. Preset	Cable
	Ant. A	Auto Channel Preset	Air	2.0	xxxxxxxxxxxxxxxxxxxxx
			Cable		xxxxxxxxxxxxxxxxxxxxx
				4.0	xxxxxxxxxxxxxxxxxxxxx
				6.0
	Enter Begin Preset			D Cancel	Home Menu Exit
• Channel search automatically starts.
	Channel Setup	Ant. A	Auto Ch. Preset	Cable
	Ant. A	Auto Channel Preset	• Cable	One Moment Please …	xxxxxxxxxxxxxxxx
					xxxxxxxxxxxxxxxx
					xxxxxxxxxxxxxxxx
		D Cancel			Home Menu Exit

• To quit Auto Channel Preset, press D.

7After Auto Channel Preset finishes, press HOME MENU to exit the menu.

NOTE

•When using the Cable Converter, you may need to manually add Cable Converter output channels.

•When a CableCARD is functioning, select “Ant.B” in step 4 to run Auto Channel Preset.

Setting for skipping unwanted channels

From among TV channels added using Auto Channel Preset, you can select channels to be skipped using CH+/-. Press ENTER after each selection.

1Press HOME MENU.

2Select “Tuner Setup”. (/ then ENTER)

3Select “Channel Setup”. (/ then ENTER)

4Select “Ant. A” or “Ant. B”. (/ then ENTER)

5Select “Channel Keep/Skip”. (/ then ENTER)

6Select a channel to be skipped. (/ then ENTER)

Channel Setup	Ant. A	Channel Keep/Skip
Ant. A	Channel Keep/Skip		xxxxxxxxxxxxxxxxxxxxx
		2.0	xxxxxxxxxxxxxxxxxxxxx
		4.0	xxxxxxxxxxxxxxxxxxxxx
		6.0
			Home Menu Exit

• The check mark next to the channel disappears.

09

7Press HOME MENU to exit the menu.

NOTE	English
select (add a check mark) a channel in step 6.
• To restore skipped channels, use the above procedure but
• When using the Cable Converter, you may need to manually
add Cable Converter output channels. Press ENTER after
each selection.

Setting up TV channels manually

This section describes how to manually set up TV channels that have not been set up by Auto Channel Preset. Press ENTER

after each selection.

1Press HOME MENU.

2 Select “Tuner Setup”. (/ then ENTER)

3 Select “Channel Setup”. (/ then ENTER)

4 Select “Ant. A” or “Ant. B”. (/ then ENTER)

5 Select “Add Channel”. (/ then ENTER)

6 Select a channel number to be added. (/ then ENTER)

•You can also use buttons 0 – 9 to enter a channel number.

Channel Setup	Ant. A	Add Channel
Ant. A	Add Channel		xxxxxxxxxxxxxxxxxxxxx
		000	xxxxxxxxxxxxxxxxxxxxx
		1	xxxxxxxxxxxxxxxxxxxxx

Home Menu Exit

• A confirmation screen appears after ENTER is pressed.

7Press A to complete the setup process.

8Press HOME MENU to exit the menu.

NOTE

•To include analog channels, manually add these channels. Digital channels cannot be added manually.

Checking signal strength

When you have selected antenna A, check the current channel’s signal strength. Also, use this function when receiving a channel through a VHF/UHF antenna. Press ENTER after each selection.

1Press HOME MENU.

2 Select “Tuner Setup”. (/ then ENTER)

3 Select “Channel Setup”. (/ then ENTER) 4 Select “Ant. A”. (/ then ENTER)

5 Select “Signal Strength”. (/ then ENTER)

Channel Setup	Ant. A	Signal Strength
		Maximum: 100	xxxxxxxxxxxxxxxxxxxxx
Ant. A		Current: 100
	Signal Strength		xxxxxxxxxxxxxxxxxxxxx

xxxxxxxxxxxxxxxxxxxxx Home Menu Exit

•Adjust the antenna direction to maximize the signal strength.

6Press HOME MENU to exit the menu.

35

En