Useful Remote Control Features
Manufacturing Reset
All learned and preset codes can be returned to the factory defaults regardless of the mode.
1Press EDIT/LEARN and TV aat the same time. The Mode switch setting is ignored.
•The LED indicator flashes and the remote control unit enters the Manufacturing Reset mode.
2Press D (yellow) to reset the remote control.
•The manufacturing reset is complete. The LED flashes for one second then the remote control unit returns to normal operation.
NOTE
•To exit the Edit mode before it is complete, press EDIT/ LEARN again.
•If the Mode switch selection is changed when in the Edit mode, the Edit session is canceled.
•If no operation is performed within one minute, the Edit session is canceled.
•When you enter an unlisted code, the LED flashes repeatedly.
•If the tables on pages 92 to 96 do not include your device’s manufacturer or the remote control does not work, use the Learn mode.
•The initial mode is “PIONEER”.
•When using any of the receiver buttons (a, INPUT, or VOL
13
English
91
En
