JVC G1000 manual Submenu items, For video system input, For computer system input, Picture menu

Operating the Main Menu (Cont.)

Adjusting Picture Quality (Cont.)

■Remote control unit	5 Make adjustment with the cursor
	button 2 or 3.
	■ For video system input

			MENU/ENTER		• To adjust multiple items, repeat steps 4 and 5.
OPERATE	COMPUTER	VIDEO	button		• To reset all items (to factory-set adjustment values “0”), select
					ALL RESET with the cursor buttons and press the MENU/
					ENTER button.
	T				• To reset only the selected items (ALL RESET excluded) to
					the factory-set adjustment value, press the remote control’s
VOL.	ZOOM	FOCUS
	W				PRESET button. The selected item is reset to the factory-set
PAGE	MENU/ENTER				adjustment value.
BACK					Adjustment item	Button	Adjustment content
						2	Gets darker.
PRESET					BRIGHTNESS		(–30 ← 0 ← +30)
			Cursor buttons				Gets brighter.
						3
							(–30 → 0 → +30)
QUICK		AV				2	Gets lower.
ALIGN.		MUTING					(–30 ← 0 ← +30)
					CONTRAST
							Gets higher.
						3
							(–30 → 0 → +30)
						2	Gets softer.
PAGE BACK button					SHARPNESS		(0 ← 7)
						3	Gets sharper.
							(0 → 7)
						2	Gets softer.
					COLOR		(–30 ← 0 ← +30)
■Submenu items						3	(–30 → 0 → +30)
							Gets deeper.
	[PICTURE menu]					2	Gets reddish.
					TINT		(–30 ← 0 ← +30)
							Gets greenish.
	P I C T U R E					3
							(–30 → 0 → +30)
	( N T S C ( 4 8 0 i ) )
	C O N T R A S T			0	ALL RESET	MENU/	Resets all adjustment values of
							items on the PICTURE menu to
	B R I G H T N E S S			0
	S H A R P N E S S			3		ENTER	the factory-set values (0).
	C O L O R		–	3
	T I N T			1
	A L L R E S E T				Notes

•The adjustment item, TINT, is displayed only for NTSC system. It is not displayed (cannot be adjusted) when PAL or SECAM system signals are input.

•When video signals are input to the COMPUTER IN-2 terminal, adjustment items “COLOR” and “TINT” are indicated but cannot be adjusted.

Notes

•The selected item is shown in magenta color. Items shown in gray color cannot be operated or set in the current mode.

•Adjustment items (on the PICTURE menu) are different when AV signals are input and when computer-related signals are input.

■For computer system input

•To adjust multiple items, repeat steps 4 and 5.

•To reset all items (to factory-set adjustment values “0”), select ALL RESET with the cursor buttons and press the MENU/ENTER button.

•To reset only the selected items (ALL RESET excluded) to the factory-set adjustment value, press the remote control’s PRESET button. The selected item is reset to the factory-set adjustment value.

(To be continued on the next page)

40

G1000[D] p.34-45 40 99.2.24, 5:51 PM