JVC DLA-G10U, DLA-G10E instruction manual Mounting the Projector on the Ceiling Mount

Page 12

English

MOUNTING THE PROJECTOR ON THE CEILING MOUNT

1 Engage the L-plate on the pin of the ceiling mount.

Ceiling mount

Drop prevention fixture

L-plate

Pin

2 Fasten temporarily with the vertical angle adjustment screws (4) which were removed. After fastening with the vertical adjustment angle screws (4), perform the adjustments described on page 13.

Vertical angle adjustment screw M5 ✕ 15 screws (4)

Prepare the following tool

Screwdriver

Completion drawing

Accessories to remove from the projector

M5 ✕ 15 screws

(4)

12

Image 12

Contents EF-G10CG Precautions for Safe and Proper USE Handling Precautions These specifications are subject to change without notice Tilt adjustment screw Vertical/horizontal adjustment screwsNames of Parts Installation Projection Distance and Screen SizeParts List Completion drawingHOW to Install Prepare the following toolHOW to Install HOW to Prevent Dropping Prepare the following accessoriesInstalling the Ceiling Mount on the Ceiling Mounting the Projector on the Ceiling Mount Horizontal angle adjustment top view Vertical angle adjustment side viewTilt angle adjustment rear view Replacing the Lamp and Filter Specifications