Replacing the Lamp and Filter

English

CAUTION

Observe the following cautions when replacing the light source lamp or filter. Failure to do so can result in personal injury or projector damage.

·Turn off the POWER button of the remote control or OPERATE button of the projector and disconnect the power cord from the power outlet.

·Take precautions to keep the DLG-G10U/E main unit and lens away from furniture, lamps, etc.

·Prepare a stable place to stand where you can work comfortably. When the installation work is difficult, lower to a safe height and call a professional installer.

1 To replace the lamp and filter, remove 2 screws while supporting the DLA-G10U/E with the hands and then lower it gently.

When removing the screws, always insert the accessory hex wrench to prevent the projector dropping suddenly.

2 Replace the lamp and filter. (Replace in accordance with the instructions given in the DLA-G10U/E instruction manual.)

Filter

Lamp