JVC AV-P950U manual Menu adjustment,  Operation,  Functions

Menu adjustment

Operation

The adjustment and setting of this unit can be performed with the on-screen menu displayed by the projector or monitor.

Press the MENU/ENTER button 1 to display the menu.

Select the adjustment item with the  button 2 and the  button 3.

Set the data with the  button 4 and the  button 5 .

When the setting is complete, press the MENU/ENTER button to exit the menu display.

2	3 4		5	1
	NEGA	BW	ON
LIGHTS	NEGA/	BW/	TEXT	MENU/
	POSI	COLOR	MODE	ENTER
CAMERA	EXT IN	PICTURE MEMORY

SOURCE SELECT

Functions

The functions and settings for each adjustment item are shown below.

Adjustment item		Functions and settings	Initial value
RED LEVEL	Adjusts the red level of the camera picture.		0
	-30 to +30 (in increments of 1 step)
BLUE LEVEL	Adjusts the blue level of the camera picture.		0
	-30 to +30 (in increments of 1 step)
DIGITAL ZOOM	Sets the maximum magnification of the digital zoom.		x 2
	OFF/x2/x4
	• The altered setting will become effective only when the ZOOM button is pressed.
JPEG	Sets the compression rate of the JPEG picture captured to a personal computer via		FINE
	the USB connector.
	FINE	: Highest picture quality, but large file size. Normally, use this mode.
	NORMAL	: The file size is between FINE and ECONOMY.
	ECONOMY : Lower picture quality, but smaller file size.
	FINE/NORMAL/ECONOMY
LOAD	Selects the settings.		CANCEL
	DEFAULT	: Returns the current conditions to the initial values (factory-set values).
		Select DEFAULT and exit the menu to start operation.
	USER	: Changes the current settings to those stored in memory with the SAVE
		function shown below. Select USER and press the MENU/ENTER button
		to start operation.
	CANCEL/DEFAULT/USER
SAVE	Stores current settings in memory.		CANCEL
	Select OK and press the MENU/ENTER button to store the settings in memory.
	The stored settings will be applied the next time the presenter is powered up.
	CANCEL/OK

•When E on the rear panel MODE switch is set to 0, there will be no menu display. (refer to MODE on the rear panel on page 8).

•When the camera picture mode is SVGA or VGA, the definition of the menu display is reduced slightly.

•With the digital zoom magnification set to x4, the picture may be pixelated when the magnification is maximized. It is recom- mended to normally use x2.

•The settings for SOURCE SELECT and FREEZE cannot be saved. When the power is supplied, SOURCE SELECT is set to CAMERA and FREEZE is set to OFF.

•While the menu is displayed on the screen, settings for TEXT MODE, BW/COLOR, NEGA/POSI and LIGHTS cannot be altered. To make alteration, first exit the menu display and then change the setting.

10