OPERATION
Control panel
LIGHTS
Use to turn on either the side illu- minations or the back illumination. With factory setting, when the power is switched on, the side illu- minations will come on.
Every time the button is pressed, the lighting of the unit changes as follows:
Side illuminations |
| back illumination |
| ||
ON |
| ON |
all lighting
OFF
side illuminations ON again, and so on.
NEGA/POSI | BW/COLOR | TEXT MODE |
| MENU/ENTER |
|
|
|
|
|
NEGA/POSI: Reverse the colors and bright- |
| Use to perform camera | ||
| ness of a picture. |
| adjustments and setting | |
| Reverses negative film images |
| on the | |
| to enable normal color picture |
| play. | |
| output. |
| (Refer to "Menu adjust- | |
| (In the NEGATIVE mode, set- |
| ment" on page 10.) | |
| tings are for the negative film.) |
|
| |
BW/COLOR: Changes a color picture into |
|
| ||
| B/W. If used when showing |
|
| |
| B/W material, definition of the |
|
| |
| picture will improve. |
|
| |
TEXT MODE: Makes characters clearer and |
|
| ||
| sharper. Use to show text ma- |
|
| |
| terial for effective presentation. |
|
| |
NEGA | BW | ON |
|
|
LIGHTS NEGA/ | BW/ | TEXT | MENU/ | DIGITAL PRESENTER |
POSI | COLOR | MODE | ENTER |
CAMERA | EXT IN | PICTURE MEMORY |
| SOURCE SELECT | |
SOURCE SELECT
Use to select the output picture. Choose from camera, EXT INPUT connector, or picture memory.
CAMERA:Picture from the camera is selected.
EXT IN:The picture input to the EXT INPUT connector (from a personal computer, for example) is selected.
When a picture is stored in memory, it can be selected as the output picture (refer to "Picture memory" on page 15).
•The picture input from the EXT INPUT connector cannot be used for the output to the VIDEO OUTPUT and
FOCUS
Use to adjust the focus of the camera picture. AUTO: When this button is pressed for
automatic focusing of an image, the indicator starts blinking. As soon as focusing is achieved the indicator will go out.
NEAR: Press this button to reduce the focal length (to focus on a point closer to the camera).
FAR: Press this button to increase the focal length (to focus on a point further from the camera).
•Press the AUTO button to exit the menu display.
6