Picture memory, Position camera angle function

Picture memory

Up to three of the most frequently used images can be stored in memory for later recall. During a presentation, you can switch between camera pictures and memory pictures as required. The stored memory pictures are useful for comparing various materials.

Operating procedure (Storing in PICTURE MEMORY 1)

1. Shoot the object whose image you want to save.

2. Adjust the picture using the ZOOM buttons 1 and the FOCUS buttons 2.

3. When the adjustments are complete, press the PICTURE MEMORY 1 buttons and hold it for about three seconds.

4. The indicator starts blinking but once the picture is stored it will remain continuously lit.

5. When the indicator is continuously lit, release the button. The image is now stored in memory.

Use the same procedure to store pictures to PICTURE MEMORY 2 and 3.

	NEGA	BW	ON
LIGHTS	NEGA/	BW/	TEXT	MENU/
	POSI	COLOR	MODE	ENTER

CAMERA EXT IN

PICTURE MEMORY

SOURCE SELECT

PICTURE MEMORY button 1

ENGLISH

6. Press the relevant PICTURE MEMORY button when selecting any of the stored pictures for output.

•Picture memory data is erased when the power is turned off.

•Picture adjustments (ZOOM, FOCUS, BRIGHTNESS, TEXT MODE, NEGA/POSI, BW/COLOR, RED LEVEL, BLUE LEVEL) cannot be performed for the camera pictures with FREEZE ON or pictures stored in memory. Return them to the FREEZE-OFF mode first and then adjust again.

•If a digital zoom picture that is stored in the memory is selected, the picture without digital zoom may be momentarily displayed.

5-position camera angle function

When shooting a 3D object, use the 5-position camera angle function to add presence and dimensionality to the picture.

	Operating procedure	7
	Operating procedure
	1. While moving the camera arm in the direction shown 4,	4
	press the UNLOCK button 5.
	2. Fold the camera arm in the direction shown 6 and when	6
	the required position is obtained, release the UNLOCK
	button 5 to lock the arm (there are 5 lockable positions).	5
	3. Rotate the camera in the direction shown 7 in order to	5
	3. Rotate the camera in the direction shown 7 in order to
	obtain a desirable angle in relation to the object.
	4. Adjust the picture using the ZOOM buttons 1 and the FO-
	CUS buttons 2.

CAUTION

• Do not release the camera arm when the UNLOCK button is pressed. Otherwise, a malfunction or in- jury may result.