Elmo HV-7000SX instruction manual Powered Manual Focus, Stage surface

The Presenter features a one-push auto focus function. Once focusing is completed, the auto focus function is released, and the focused position maintains unchanged. (FOCUSFREE)

To obtain sharper image, zoom in on the object in the auto- focus mode while pressing the zoom button [TELE] on the front operation panel or wireless remote control.

However, the objects listed below may not be brought into focus in the auto focus mode. In these cases, use the manual focus mode.

·Objects bearing little contrast

·Objects with fine repeated patterns, such as lateral stripes and cross stripes

·Objects glittering or reflecting strong light

·Objects with bright background, or excessive contrast

·Objects in a dark picture plane

·Objects located near and far away at the same time

·Objects in motion

If the focus button [NEAR] or [FAR] on the front operation panel or wireless remote control is pressed during the auto focus, the auto focus will be released.

Notes:· The auto focus functions up to approx. 10cm above the stage surface.

·If the camera head gets heavy shock by accident, there is a possibility of out of focus. In such a case, once turn the power OFF and then re-set to ON.

·It may take some time to bring the camera into focus in the auto focus mode.

Roughly bring the camera into focus manually and then press the auto focus button [AF].

Powered Manual Focus

To focus on any part of the material, such as 3-D material, press the focus button [NEAR] or [FAR] on the front operation panel or wireless remote control.

Note: The manual focus works up to approx. 10cm above

the stage surface.

Front operation panel

Wireless remote control

Front operation panel

Wireless remote control

Front operation panel

Wireless remote control

23