Elmo HV-7000SX instruction manual Table of the communication commands, Parameter Data Comments

Table of the communication commands

Function	Command	Parameter			Data	Comments
Auto Focus	AF	0				Command to execute the one-step auto focus.
Focus	FO	+ (NEAR)				Command to adjust the focus.
adjustment		– (FAR)
		0	(STOP)
Zoom	ZO	+ (TELE)				Command to adjust the Zoom.
adjustment		– (WIDE)
		0	(STOP)
Iris adjustment	IR	+ (OPEN)				Command to adjust the Iris.
		– (CLOSE)
		0	(STOP)
		1	(AUTO)
Lighting	PL	0 (OFF)				Command to select the Lighting.
selection		1	(BASE)
		2	(UPPER)
Input selection	AV	0 (MAIN)				Command to select the Input.
		1	(RGB1)
		2	(RGB2)
Posi/Nega	NP	0 (POSI)				Command to convert Posi/Nega.
conversion		1	(NEGA)
Color/B&W	CB	0 (COLOR)				Command to select Color/B&W.
selection		1	(B&W)
Pointer display	PO	0 (OFF)				Command to turn ON/OFF the Pointer display.
		1	(ON)
Enlarged	PM	0 (STOP)				• When the pointer is ON
image		1	(	)		The pointer moves.
movement		2	(	)		• When the image enlargement is ON
		3	(	)		The enlarged image moves.
		4	(	)		1: To the right side.
		5	(	)		2: To the left side.
		6	(	)		3: To the upper side.
		7	(	)		4: To the lower side.
		8	(	)		5: To the lower left.
						6: To the upper right.
						7: To the upper left.
						8: To the lower right.
Electronic	MA	0 (OFF)				Command to enlarge the image to double the area around the pointer
Magnification		1 (ON)				position.
Pause	FZ	0 (OFF)				Command to pause the image.
		1 (ON)
Local lockout	LL	0 (OFF)				Command to invalidate the switches on the front operation panel and
		1 (ON)				wireless remote control.

32