Elmo HV-7000SX instruction manual Rear Panel, 80XG, RS-232C, For controlling the Presenter

Rear Panel
27. AC Outlet			30. Mouse Control Terminal			35. Audio-out Terminal			38. Audio-in
26. Power Cord	29. Infrared Sensor			33. Analog RGB Output Terminal			36. Video-in		Terminal 1
Receptacle							Terminal 1
AC IN				MOUSE CONTROL		OUTPUT		INPUT
					RGB OUT		RGB1	AUDIO(L/R)1
						R
	OUTPUT		USB			L
				S-VIDEO		AUDIO	RGB2	AUDIO(L/R)2
						VIDEO
	12V	0.9A		RS-232C

			37. Video-in
28. DC Output Terminal		31. RS-232C Terminal
			Terminal 2	39. Audio-in
		34. Video-out Terminal
	32. USB Terminal			Terminal 2
		S-Video (mini DIN 4P)/
		Composite-Video (RCA pinjack)
	Part Name	Function		Reference Page
26	Power Cord Receptacle [AC IN]	To connect the power cord.
27	AC Outlet	To supply power up to 400W (Not interlocked with the power switch).
28	DC Output Terminal	To output 12VDC. Any applicable equipment up to 0.9A can be
	[OUTPUT]	connected. The optional LCD Color Monitor (LM-5011N) or
		ELMO Desk-top Presenter (HD-80XG) can be connected with the
		supplied DC cable.
		Note: Do not connect any equipment other than ELMO HD-
		80XG.
29	Infrared Sensor	The light receiver of the wireless remote control. When operating		P.11
		the Presenter from behind, aim the wireless remote control at this
		light receiver.
30	Mouse Control Terminal	To connect the supplied mouse.
	[MOUSE CONTROL]	Note: A serial type mouse is connected.
31	RS-232C Terminal	To connect a PC with an RS-232C cable to control the Presenter from		P.31
	[RS-232C]	the PC.
		Note: This terminal is disabled if the USB terminal is used
		for controlling the Presenter.
32	USB Terminal	To connect the supplied USB cable to control the image transfer and
	[USB]	the Presenter by using the supplied CD-ROM [Image Mate for USB].
		Note: This terminal is disabled if the RS-232C terminal is
		used for controlling the Presenter.
33	Analog RGB Output Terminal	To connect RGB input equipment, such as an LCD Projector and a
	[OUTPUT•RGB OUT]	Multi-SYNC Monitor, to output the image.
34	Video-out Terminal	To connect a NTSC/PAL conformable monitor, such as a TV
	[OUTPUT•S-VIDEO/VIDEO]	monitor and the optional LCD Color Monitor (LM-5011N), to
	S-Video (mini DIN 4P)	output the image.
	Composite-Video (RCA pinjack)
35	Audio-out Terminal	To connect audio input equipment to output the audio.
	[OUTPUT•AUDIO]
36	Video-in Terminal 1	Video signal from this terminal is output through the analog RGB
	[INPUT•RGB1]	output terminal when input selection is set at RGB1.
37	Video-in Terminal 2	Video signal from this terminal is output through the analog RGB
	[INPUT•RGB2]	output terminal when input selection is set at RGB2.
38	Audio-in Terminal 1	Audio signal from this terminal is output through the audio-out
	[INPUT•AUDIO (L / R)1]	terminal when input selection is set at RGB1.
39	Audio-in Terminal 2	Audio signal from this terminal is output through the audio-out
	[INPUT•AUDIO (L / R)2]	terminal when input selection is set at RGB2.

8