Elmo HV-100XG instruction manual Name Function, RGB Input

No.	Name	Function
1	Camera Head	Moving up/down the camera head can change the
		size of an object in display on the monitor screen
		smoothly.
2	Arm	A link part for moving the camera head horizontally.
3	Base Unit	A base part of the Presenter.
4	Main Stage	A stage for placing an object thereon.
5	Auxiliary Stage	Use this stage, if necessary, according to the object
		size.
6	Lamp	To be used when the image is dark.
7	Lamp Switch [LAMP]	Lamp ON/OFF switch.

8Image Input Selection To switch the image output from the RGB-out

	Switch [INPUT]	terminal [RGB OUT].
		[RGB IN] . . Image via the RGB-in terminal
		[RGB INPUT]
		[MAIN] . . . . Image via the main camera
9	Power Switch [POWER]	Power ON/OFF switch.
10	Power Terminal	The DC jack of the AC adaptor is inserted into this
	[DC IN 12V]	terminal (12VDC).
11	Accessory Case	A case for housing the AC adaptor and the analog
		RGB cable exclusively. When the Presenter is
		stored, house this case inside the stage.
12	Analog RGB Cable	To connect the Presenter to the monitor/projector.
13	AC Adapter	To connect the Presenter to an outlet (120VAC).

- 8 -