ATM/POS bridge Installation Manual | EN 5 |
|
|
1.5 Connections
Using the supplied cables, connect the bridge as follows:
1.Connect the supplied DC power adapter unit to the DC power input connector of the bridge.
2.Connect the RJ45 connector of the bridge via a straight Ethernet CAT5 network cable to a network switch or hub that supports 10BaseT. Alternatively, the bridge can be connected directly to the digital video recorder via a
3.To configure the bridge, use an RS232 cable to connect the COM3 (console) port to the serial port of a PC. If you use the RS232 console cable supplied with the bridge, ensure that the bridge is powered before connecting the cable.
| COM 3 (console) RS232 connector |
Ethernet RJ45 connector | DC Power input connector |
Activity indicator
English
COM 4 RS485 connector | COM 2 RS232 connector | COM 1 RS232 connector |
Bosch Security Systems