Bosch Appliances manual Overview, D8125INV Back View, System Supervision Watchdog, Self-Testing

Page 10

D8125INV

Overview

•All RF points will initialize in a normal state when power is reapplied

•Alarms initiated prior to power loss would be reset. If the alarm conditions persist when power is restored, new alarms would be generated.

Note: Programmed settings such as RF point configuration and System ID will remain intact upon the event of a power loss.

2.2.2System Supervision

2.2.2.1 Watchdog

The D8125INV implements a watchdog software. Failure of the program will result in a software reset within two seconds. This may cause a trouble condition on the control panel for the duration of the reset.

2.2.2.2 Self-Testing

The D8125INV EEPROM memory is automatically tested on a periodic basis. The EEPROM checksum is verified every ten minutes. If the EEPROM checksum fails, a point bus trouble condition will be seen at the control panel.

2.3D8125INV Inovonics Interface Module Point Expansion Description

Using two D8125INVs, you can program up to 238 (119 per bus) Inovonics Wireless Transmitters to the system on the D9412GV2, D7412GV2, D9412G, D7412G, D9412, D7412, D7212, and D9112 allow up to 67 Inovonics Wireless Transmitters, and D7212GV2 and D7212G allow up to 32 Invonics wireless transmitters.

The D8125INV is an integrated interface module and keypad. The keypad is used to access the programming, and diagnostic functions of the wireless portion of the system. The integrated keypad on the D8125INV is physically different looking from the typical keypads (D1255, D1256, D1257, and so on) so that it will not be mistaken for a system keypad. When mounting the D8125INV, it must be within 5 feet (of the control panel. It has been designed such that it should be mounted right next to the D8103, D8108A or D8109 enclosure.

The D9412GV2, D7412GV2, D7212GV2, D9412G, D7412G, D7212G, D9412, D7412, D7212, and D9112 Control Panels can have both hardwired (D8128D OctoPOPITS, D8125 Popex / D9127 POPITS, D8125MUX) and wireless points connected at the same time.

To add wireless points, an Inovonics FA400 Receiver must be connected to the D8125INV which is then connected to the control panel’s Zonex 1 (and/or Zonex 2) terminals and Aux Power. For best transmitter reception results, the FA400 should be centrally located among the transmitters. If transmitters are at too great of a distance for the FA400 Receiver to pick up the transmission, an Inovonics RF Repeater may be installed.

2.4D8125INV Back View

See Figure 1 for areas of importance on the

D8125INV,

1.Programming Jack (Access using front panel)

2.EPROM Socket – contains EPROM with encoded software

3.Sounder to indicate valid and invalid entry via the keypad

4.4-Wire Zonex Power Panel Connection Terminal Strip

5.FA-400 Receiver Terminal Strip

6.LCD Contrast Adjustment

The D8125INV provides connection to a control panel using a Zonex 4-wire interface and to a FA-400 Receiver via a 3-wire interface.

Figure 1: D8125INV Back View

D8125INV Operation and Installation Guide

49690E

Page 10

© 2005 Bosch Security Systems

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Wireless Interface Module D8125INV D8125INV Contents Figures Tables D8125INV Other Literature Referenced IntroductionFCC Compliance Notice, Part Documentation ConventionsTips, Important Notes, Cautions and Warnings Specifications FeaturesOverview D8125INV Overview D8125INV Back View Self-TestingOverview System Supervision WatchdogInstallation Mounting the D8125INVWiring the D8125INV to the Control Panel and FA400 Receiver Refer to and for the proper wiring connectionsD8125INV Quick Startup Recommendations Setting the Jumper for a second receiverLabeling the Inovonics Transmitters Key Description Initial Power-UpD8125INV Keypad Operation Key DescriptionsRF System OK Call for ServiceFactory Default Passcode Entering Invalid PasscodesD8125INV Menu Selections Beginning steps to add/edit/delete an RF TransmitterInovonics Transmitter Mode Point ModeInovonics Mode External Contact Internal Fire Normally Recommended Mode ValuesRF Transmitter options Menu 1 Add, Edit or Delete RF TransmitterFunction Used When… For more information… Adding a new RF TransmitterD8125INV Connecting cable To D8125INV Adding an existing RF TransmitterDeleting an RF Transmitter Programming the FA570/FA575 RepeaterProgramming the FA113 Keyfob Menu 2 Change Installer Passcode Recommended Point Types/Point ResponsesMenu 3 Set System ID Menu 4 Clear Eeprom Menu 5 Set RF System Supervision IntervalRF Diagnostics Function Variable Description Variable DescriptionsD8125INV Troubleshooting Symptom Diagnosis RemedyD8125INV FA400 Receiver Supervision Low Transmitter Battery ConditionsTroubleshooting Solutions Missing TransmittersD8125INV Power Cycle Operation Inovonics Frequently Asked QuestionsCan I externalize an antenna? What is temperature range for good operation?Does each transmitter need a repeater? D8125INV Point Text D8125INV Program SheetLocation Or N/C Yes / No D8125INV D8125INV D8125INV

D8125INV specifications

The Bosch Appliances D8125INV is a remarkable addition to the world of high-end kitchen technology, designed to deliver exceptional performance and unparalleled convenience for modern households. This innovative appliance boasts a range of features that cater to the needs of discerning chefs and anyone who appreciates quality in their kitchen equipment.

One of the standout characteristics of the D8125INV is its sleek, integrated design. The built-in style allows it to blend seamlessly with your cabinetry, providing a streamlined look that enhances any kitchen decor. The ability to customize the front panel to match your cabinetry ensures that this appliance does not disrupt the aesthetic of your kitchen.

In terms of functionality, the D8125INV excels. It features a spacious capacity, offering ample room for cooking a variety of dishes simultaneously. The appliance is equipped with advanced cooking technologies, including a powerful convection system that ensures even heat distribution for perfectly cooked meals every time. This feature significantly reduces cooking times and enhances the quality of food.

The D8125INV also incorporates precision cooking with multiple cooking modes, including traditional bake, broil, and specialized modes like pizza and bread baking. These options cater to various culinary techniques and preferences, allowing users to experiment and explore different cooking styles with ease. The intuitive control panel provides easy access to these functions, ensuring that even novice cooks can achieve professional results.

Another remarkable aspect is the appliance's energy efficiency. With Bosch's commitment to sustainability, the D8125INV has been designed to consume minimal energy without compromising performance. This makes it an environmentally friendly choice for eco-conscious consumers.

Safety is also a priority with this model. It includes features such as a safety lock and an automatic shut-off function to prevent overheating and accidents in the kitchen, providing peace of mind while cooking.

Additionally, the easy-to-clean interior and removable racks make maintenance a breeze, allowing users to focus more on cooking and less on cleanup.

Overall, the Bosch Appliances D8125INV is a perfect blend of style, functionality, and efficiency, making it an ideal investment for those looking to elevate their culinary experience and kitchen design. With its innovative features and commitment to quality, this appliance stands out as a top choice for modern kitchens.
Top Page Image Contents