Bosch Appliances manual D8125INV Keypad Operation, Key Descriptions, Initial Power-Up

D8125INV

Installation

3.5D8125INV Keypad Operation

To access the keypad on the D8125INV, simply open the door by gently pulling on the tab on the bottom center of the keypad (Figure 6).

The keypad of the D8125INV is comprised of the following (see Figure 7: D8125INV Keypad):

1.LCD Display

2.Keys (see Table 5)

3.Transmitter Programming Jack

Key	Description
ESC	Escape – Backs out of a programming
	option or menu level.
ENT	Enter – Accepts a program entry.
PREV	Manually scrolls to a previous menu or
	point selection. This key will also stop
	the auto-scrolling of the menus.
NEXT	Manually scrolls to the next menu or
	point selection. This key will also stop
	the auto-scrolling of the menus.
DIAG	Shortcut to RF Diagnostics menu (see
	Section 3.6.6 RF Diagnostics Function,
	p.26)
	Table 5: Key Descriptions

Figure 6: Tab to expose keypad

1

2

3

Figure 7: D8125INV Keypad

Single beep indicates entry is acknowledged, two beeps indicate valid entry and three beep tones indicate an input error has been made.

3.5.1	Initial Power-Up
When the D8125INV is powered up for the first time from the factory, it will
display Figure 8 for approximately 3 seconds before displaying idle text
(Figure 9, Figure 10 or Figure 11).
The “System”, in this case, is the D8125INV.
Note:	The Version 01.01 and System ID of 123 is only used here for an	Figure 8: Initializing screen
	example. The actual Version and System ID number may be different.

After that, Figure 9 will appear if no transmitters are programmed into the D8125INV, Figure 10 will appear if one or more transmitters are already programmed in the D8125INV and are not missing, or Figure 11 will be displayed if the D8125INV has a system fault.

Figure 9: System Defaulted Display

D8125INV Operation and Installation Guide

49690E Page 14 © 2005 Bosch Security Systems