Sharp XG-MB65X-L, XG-MB55X-L, XR-10X-L, XR-10S-L operation manual Maintenance Indicators

Page 54

Maintenance Indicators

The warning lights (power indicator, lamp indicator and temperature warning indicator) on the projector indicate problems inside the projector.

If a problem occurs, either the temperature warning indicator or the lamp indicator will illuminate red, and the projector will enter standby mode. After the projector has entered standby mode, follow the procedures given below.

Top View

Temperature warning indicator

Lamp indicator

Power indicator

About the temperature warning indicator

If the temperature inside the projector increases, due to blockage of the air vents, or the setting location,

” will illuminate in the lower left corner of the picture. If the temperature keeps on rising, the lamp will turn off and the temperature warning indicator will blink, the cooling fan will run, and then the projec-

tor will enter standby mode. After “” appears, ensure you perform the measures described on page 51.

About the lamp indicator

When the remaining lamp life becomes 5% or less, (yellow) and “Change The Lamp” will be displayed on the screen. When the percentage becomes 0%, it will change to (red), the lamp will automatically turn off and then the projector will automatically enter standby mode. At this time, the lamp indicator will illuminate in red.

If you try to turn on the projector a fourth time without replacing the lamp, the projector will not turn on.

Indicators on the Projector

Power indicator

Red on

Normal (Standby)

 

 

 

 

Green on

Normal (Power on)

 

 

 

 

Red blinks

Abnormal (See page 51.)

 

 

 

 

Green blinks

Normal (Cooling)

Lamp indicator

Green on

Normal

 

 

 

 

Green blinks

The lamp is warming up or shutting down.

 

 

 

 

Red on

The lamp is shut down abnormally or

 

 

requires to be changed. (See page 51.)

 

 

 

Temperature warning

Off

Normal

indicator

 

 

Red on

The internal temperature is abnormally

 

 

 

high. (See page 51.)

 

 

 

50

Image 54
Contents XG-MB65X-L Model No Serial No This Apparatus Must be Earthed If YOU have ANY DOUBT, Consult a Qualified ElectricianPage IntroductionENGLISH A. onlySharp Electronics Corporation OnlyUsing the Menu Screen For Future ReferenceContents Reference Power Sources CleaningAccessories Power-Cord ProtectionSafety Check Damage Requiring ServiceReplacement Parts OverloadingRest your eyes occasionally Avoid locations with extremes of tem- peratureDo not block the exhaust and intake vents Using the projector in other countries Temperature monitor functionOther connected equipment Accessories Optional accessoriesHeight 29 Adjust Part Names and FunctionsProjector Rear View Audio Input 1Audio Input Break Timer Picture ModeInserting the Batteries Attach the cover and slide it until it clicks into placeUsable Range Setup and Projection Quick StartSTANDBY/ON Upper side ProjectorStandard Setup Front Projection Setting up the ProjectorSetting up the Projector Ceiling-mount SetupProjection Projection PRJ ModeExample Normal Mode Picture Size DistanceNormal Mode Stretch ModeScreen Size and Projection Distance Connections Input Terminals and Connectable Main EquipmentCOMPUTER-RGB/COMPONENT Samples of Cables for Connection Connecting to a Computer To audio output terminal To RGB output terminalComputer To INPUT1 terminal To Audio Terminal Connecting to Video Equipment When using an S-video cable INPUT3Connecting to a Monitor with RGB Input Terminal When using a composite video cable INPUT4Connecting the Power Cord Controlling the Projector by a ComputerAC socket To AC outlet Turning the Projector On/Off Turning the Projector onAdjusting the Picture Size About the Setup GuideAdjusting the Projected Image Adjusting the Focus Image ProjectionAdjust lever Make small adjustments Adjusting the HeightUse the rear adjustment foot to make the projector level Rear adjustment footSwitching the Input Mode Adjusting the VolumeAV Mute button Volume buttons Input buttons Correcting Trapezoidal Distortion Press g Keystone to enter Keystone Correction modePress P/Q or O/R to adjust Keystone Correction Press g KeystoneResize Mode Press HresizeVideo Displaying and Setting the Break Timer Operating with the Remote ControlAuto Sync Auto Sync Adjustment Selecting the Picture ModeInput 1 Component/INPUT Menu ItemsInput 1 RGB/INPUT2 RGB Component/INPUT 3/INPUTItems you can set with the Help menu Help menu nPress Q or O and select Picture to adjust Using the Menu ScreenMenu Selections Adjustments Press BmenuPress O or Q to adjust the item selected To adjust the projected image while watching itPress P or R and select Bright to adjust Press hENTERPicture Adjustment Picture menu Example Picture screen menu for Input 1 RGB mode2Adjusting the Image Menu operation nAdjusting the Projected Image SCR ADJ menu When using XG-MB65X-L or XG-MB55X-LSet Auto Keystone on the SCR ADJ menu to On Adjusting the Projected Image SCR ADJ menu Adjusting the Projector Function PRJ ADJ menu Select System Lock, then press hENTER or Q This function changes the fan rotation speedEnter the same keycode in Re- confirm Locking the Operation ButtonsATaking the Keylock off Troubleshooting with the Help menu Utilizing the Help menu func TionsMENU/HELP Maintenance Cleaning the projectorCleaning and Replacing the Dust Filters Cleaning the Dust FiltersRemove the filter holders Replacing the Dust Filters Replace the filter holdersReinforcement seal Maintenance Indicators Temperature warning indicator Lamp indicator Power indicatorPlease exercise care when Regarding the Lamp LampReplacing the Lamp Removing and Installing the Lamp Unit Disconnect the power cordRemove the lamp unit cover Resetting the Lamp Timer Connecting Pin Assignments GNDRS-232C Specifications and Command Settings Return code 0DHCommands Control Contents Input 4 CLR Temp *2 OK or ERR Computer Compatibility Chart ComputerTroubleshooting 23-2647-51 For Sharp Assistance Specifications Audio OutputDimensions Index

XG-MB55X-L, XG-MB65X-L, XG-MB55X-L, XR-10X-L, XR-10S-L, XG-MB65X-L specifications

Sharp has long been a recognized leader in display technology, and its latest offerings, including the Sharp XG-MB65X-L, XG-MB55X-L, XR-10X-L, and XR-10S-L, continue to set the standard for high-quality visual performance in a variety of settings. These models cater to diverse needs, from business presentations to educational environments and high-end home theaters.

The Sharp XG-MB65X-L and XG-MB55X-L are standout models featuring a powerful blend of brightness and resolution. With vibrant colors and high contrast ratios, both projectors deliver stunning image quality, making them ideal for large audiences. Equipped with advanced DLP technology, these projectors ensure sharp, clear images even in well-lit environments. The 65-inch and 55-inch screen sizes respectively cater to different room sizes and audience requirements, without compromising on visual clarity.

Incorporating the latest in connectivity options, these models support various inputs, including HDMI, USB, and wireless capabilities, offering flexibility in how content is presented. This means that users can easily connect laptops, tablets, and even smartphones to stream presentations or videos seamlessly. Furthermore, the XG-MB series is designed with an eco-friendly mindset, featuring energy-saving modes that don't sacrifice performance.

On the other hand, the XR-10X-L and XR-10S-L are designed with portability in mind, making them perfect for on-the-go presentations. These models feature lightweight constructions and compact designs, allowing professionals to transport them easily. Despite their smaller sizes, they boast impressive brightness levels and image quality, ensuring that presentations remain impactful in various lighting conditions. The XR-10 series also benefits from user-friendly interfaces, simplifying the setup process and enabling quick adjustments.

Both series prioritize longevity and reliability, featuring extended lamp life and built-in maintenance alerts. This ensures minimal downtime and maximizes productivity, whether in corporate meetings or educational classrooms. Additionally, Sharp’s commitment to sound technology is evident, with each model equipped with built-in speakers that deliver clear audio to complement the exceptional visuals.

Overall, the Sharp XG-MB65X-L, XG-MB55X-L, XR-10X-L, and XR-10S-L projectors represent the pinnacle of Sharp's innovation in display technology. Their unique features, advanced technologies, and versatile characteristics make them suitable for a wide range of applications, ensuring that users can deliver their best presentations with confidence and ease.