Sharp XG-MB55X-L, XG-MB65X-L Turning the Projector On/Off, Turning the Projector on

Page 31

Turning the Projector On/Off

Turning the Projector on

Note that the connections to external equip- ment and power outlet should be done be- fore performing the operations written be- low. (See pages 23 to 26.)

Remove the lens cap and press SSTANDBY/ON on the projector or fON on the remote control.

•When System Lock is set, the keycode input box appears. To cancel the keycode setting, input the keycode that you have already set. See page 44 for details.

Note

•About the Lamp Indicator

The lamp indicator illuminates to indicate the status of the lamp.

Green: The lamp is on.

Blinking in green: The lamp is warming up or shut-

ting down.

Red: The lamp is shut down abnormally or the lamp should be replaced.

•When switching on the projector, a slight flickering of the image may be experienced within the first minute after the lamp has been illuminated. This is normal operation as the lamp’s control circuitry is stabilising the lamp output char- acteristics. It should not be regarded as faulty operation.

•If the projector is put into standby mode and immediately turned on again, the lamp may take some time to start pro- jection.

Turning the Power off (Putting the Projector into Standby Mode)

1

Press SSTANDBY/ON on the pro-

jector or eSTANDBY on the re-

 

mote control, then press that but-

 

ton again while the confirmation

 

message is displayed, to put the

 

projector into standby mode.

2

Unplug the power cord from the AC

outlet after the cooling fan stops.

• The power indicator on the projector blinks in green while cooling.

• The power indicator changes to red when the projector finishes cooling.

Info

•English is the factory default language. If you want to change the on-screen display to another language, change the language according to the procedure on page 42.

Lamp indicator

Power indicator

STANDBY/ON button

STANDBY button

ON button

Operation Basic

 

On-screen Display (confirmation message)

 

R

Info

•Do not unplug the power cord during projection or cooling fan operation. This can cause dam- age due to rise in internal temperature, as the cooling fan also stops.

27

Page 30 Page 32
Image 31
Page 30 Page 32
Contents XG-MB65X-L Model No Serial No If YOU have ANY DOUBT, Consult a Qualified Electrician This Apparatus Must be EarthedPage A. only IntroductionENGLISHOnly Sharp Electronics CorporationFor Future Reference Using the Menu ScreenContents Reference Power-Cord Protection CleaningAccessories Power SourcesOverloading Damage Requiring ServiceReplacement Parts Safety CheckAvoid locations with extremes of tem- perature Rest your eyes occasionallyDo not block the exhaust and intake vents Temperature monitor function Using the projector in other countriesOther connected equipment Optional accessories AccessoriesPart Names and Functions Height 29 AdjustProjector Audio Input 1 Rear ViewAudio Input Picture Mode Break TimerAttach the cover and slide it until it clicks into place Inserting the BatteriesUsable Range Quick Start Setup and ProjectionSTANDBY/ON Projector Upper sideCeiling-mount Setup Setting up the ProjectorSetting up the Projector Standard Setup Front ProjectionDistance Projection PRJ ModeExample Normal Mode Picture Size ProjectionStretch Mode Normal ModeScreen Size and Projection Distance Input Terminals and Connectable Main Equipment ConnectionsCOMPUTER-RGB/COMPONENT Samples of Cables for Connection To audio output terminal To RGB output terminal Connecting to a ComputerComputer To INPUT1 terminal To Audio Terminal When using an S-video cable INPUT3 Connecting to Video EquipmentWhen using a composite video cable INPUT4 Connecting to a Monitor with RGB Input TerminalControlling the Projector by a Computer Connecting the Power CordAC socket To AC outlet Turning the Projector on Turning the Projector On/OffImage Projection About the Setup GuideAdjusting the Projected Image Adjusting the Focus Adjusting the Picture SizeRear adjustment foot Adjusting the HeightUse the rear adjustment foot to make the projector level Adjust lever Make small adjustmentsAdjusting the Volume Switching the Input ModeAV Mute button Volume buttons Input buttons Press g Keystone Press g Keystone to enter Keystone Correction modePress P/Q or O/R to adjust Keystone Correction Correcting Trapezoidal DistortionPress Hresize Resize ModeVideo Selecting the Picture Mode Operating with the Remote ControlAuto Sync Auto Sync Adjustment Displaying and Setting the Break TimerComponent/INPUT 3/INPUT Menu ItemsInput 1 RGB/INPUT2 RGB Input 1 Component/INPUTHelp menu n Items you can set with the Help menuPress Bmenu Using the Menu ScreenMenu Selections Adjustments Press Q or O and select Picture to adjustPress hENTER To adjust the projected image while watching itPress P or R and select Bright to adjust Press O or Q to adjust the item selectedExample Picture screen menu for Input 1 RGB mode Picture Adjustment Picture menuMenu operation n 2Adjusting the ImageWhen using XG-MB65X-L or XG-MB55X-L Adjusting the Projected Image SCR ADJ menuSet Auto Keystone on the SCR ADJ menu to On Adjusting the Projected Image SCR ADJ menu Adjusting the Projector Function PRJ ADJ menu This function changes the fan rotation speed Select System Lock, then press hENTER or QLocking the Operation Buttons Enter the same keycode in Re- confirmATaking the Keylock off Utilizing the Help menu func Tions Troubleshooting with the Help menuMENU/HELP Cleaning the projector MaintenanceCleaning the Dust Filters Cleaning and Replacing the Dust FiltersRemove the filter holders Replace the filter holders Replacing the Dust FiltersReinforcement seal Temperature warning indicator Lamp indicator Power indicator Maintenance IndicatorsPlease exercise care when Lamp Regarding the LampReplacing the Lamp Disconnect the power cord Removing and Installing the Lamp UnitRemove the lamp unit cover Resetting the Lamp Timer GND Connecting Pin AssignmentsReturn code 0DH RS-232C Specifications and Command SettingsCommands Control Contents Input 4 CLR Temp *2 OK or ERR Computer Computer Compatibility Chart23-26 Troubleshooting47-51 For Sharp Assistance Audio Output SpecificationsDimensions Index

XG-MB55X-L, XG-MB65X-L, XG-MB55X-L, XR-10X-L, XR-10S-L, XG-MB65X-L specifications

Sharp has long been a recognized leader in display technology, and its latest offerings, including the Sharp XG-MB65X-L, XG-MB55X-L, XR-10X-L, and XR-10S-L, continue to set the standard for high-quality visual performance in a variety of settings. These models cater to diverse needs, from business presentations to educational environments and high-end home theaters.

The Sharp XG-MB65X-L and XG-MB55X-L are standout models featuring a powerful blend of brightness and resolution. With vibrant colors and high contrast ratios, both projectors deliver stunning image quality, making them ideal for large audiences. Equipped with advanced DLP technology, these projectors ensure sharp, clear images even in well-lit environments. The 65-inch and 55-inch screen sizes respectively cater to different room sizes and audience requirements, without compromising on visual clarity.

Incorporating the latest in connectivity options, these models support various inputs, including HDMI, USB, and wireless capabilities, offering flexibility in how content is presented. This means that users can easily connect laptops, tablets, and even smartphones to stream presentations or videos seamlessly. Furthermore, the XG-MB series is designed with an eco-friendly mindset, featuring energy-saving modes that don't sacrifice performance.

On the other hand, the XR-10X-L and XR-10S-L are designed with portability in mind, making them perfect for on-the-go presentations. These models feature lightweight constructions and compact designs, allowing professionals to transport them easily. Despite their smaller sizes, they boast impressive brightness levels and image quality, ensuring that presentations remain impactful in various lighting conditions. The XR-10 series also benefits from user-friendly interfaces, simplifying the setup process and enabling quick adjustments.

Both series prioritize longevity and reliability, featuring extended lamp life and built-in maintenance alerts. This ensures minimal downtime and maximizes productivity, whether in corporate meetings or educational classrooms. Additionally, Sharp’s commitment to sound technology is evident, with each model equipped with built-in speakers that deliver clear audio to complement the exceptional visuals.

Overall, the Sharp XG-MB65X-L, XG-MB55X-L, XR-10X-L, and XR-10S-L projectors represent the pinnacle of Sharp's innovation in display technology. Their unique features, advanced technologies, and versatile characteristics make them suitable for a wide range of applications, ensuring that users can deliver their best presentations with confidence and ease.
Top Page Image Contents