Language, Quick menu, Zap menu, Pointer, Blank

6.2.2 Language

Language selection

This menu allows you to choose between six different menu languages: English, French, German, Italian, Spanish and Norwegian.

Click in the box next to the language you want to use. Click on the OK button. The window will disappear, and the selected language will be used in the main menu and in all other menus.

6.2.3 Quick menu

Quick menu settings

In the quick menu you can assign functionality for the quick key on the remote control. When clicking on the quick key you will be able to switch between all the functions you have selected in this menu. You adjust the bar by either pressing the pressure-sensing pad right or left or you may use one of the two zap keys on the remote control. To accept the adjust- ment, and terminate the quick menus click on the left mouse button. To get back to the orig- inal setup, click on the right mouse button. The next click on the quick key will accept the adjustment and activate the brightness func- tion and a brightness bar will be shown at the bottom of the page. When you have gone through all assigned functions the menu will disappear.

6.2.4 Zap menu

Zap menu

The Zap menu is used to assign functions to the zap keys on the remote control. The menu consists of two columns of buttons where the left column assigns the functions to the left key and the right column assigns the functions to the right key.

Note:

Un-selecting all boxes for Zap 1 assigns the “Zap 1’ button on the remote to Power-up the projector from stand-by mode. Un-selecting all boxes for Zap 2 assigns the “Zap 2” button on the remote to function as the Power-down (stand-by) button.

Pointer

You can activate the pointer function in the projector. One click activates the pointer and the next click deactivates it.

Blank

Activates blank mode by pressing the Zap key. First click will activate Blank mode and second click will deactivate it.

Computer

Selects Computer as the source.

Video

Selects video sources. Both Zap keys can be programmed to select Video.

6.2.5 Show accumulated lamp time

Show accumulated lamp time

In this window you can see the accumulated time that the lamp has been in use. You also use this window to reset the accumulated lamp time after the lamp has been replaced.

18	18	19	19