Set-up menu

Auto set-up

Auto set-up will do automatic set-up of the projector:

•Horizontal and vertical position

•Sampling clock

•Phase

•Chooses between available video formats and NTSC/PAL auto detection

Source

You can connect three different sources to the projector; one computer source, two video sources.

You select the source you want to use by click- ing on the icon representing the source. Use the pressure-sensing pad on the remote mouse to move the mouse pointer to an icon and click the button (left mouse) underneath the remote mouse.

In this menu you set up the projector with settings that will not be changed often, e.g. language or picture orientation.

Control panel

In this menu you can make adjustments for picture.

Removing the main menu

To remove the menu system, press the MENU key on the Remote control. You can also remove the menu by clicking the right mouse button (on the top of the remote control). The right mouse button will also function as cancel when in the menus.

The menu will disappear in 40 seconds.

Product information

Click on the product information icon for information about the product and support.

Press the main menu button again to exit this screen.

6.2 Set-up menu

Set-up menu

In the set-up menu the following sub-menus are available:

•Picture orientation

•Language

•Quick key assignment

•ZAP keys assignment

•Accumulated lamptime

6.2.1 Picture orientation

Picture orientation

The picture orientation menu is used for rotating and mirroring the picture.

Normal

Normal is used when the projector is standing on a table projecting a picture on a screen.

Mirror

Mirror is used when the projector is projecting a picture from behind the screen

Rotate

Rotate is used when the projector is ceiling mounted and projecting an image from the front.

Rotate and mirror

Rotate and mirror is used when the projector is ceiling mounted and projects the picture from behind the screen.

16		17