When PAL/SECAM video is connected brightness, contrast and saturation will be available.
All options will be available when NTSC video is connected.
Select OK to save your changes and exit, or select Cancel to exit without saving your changes. Selecting Default restores factory set- tings.
7.3.2 Audio control
Audio control
Select this function when you have connected an audio signal to the ‘Audio in’ on the projec- tor connectors (or through the EVC cable). Use the four sliders to adjust volume, bass, treble and balance.
Select Internal Mute to mute the internal speaker. Select External Mute to mute the external audio output.
Select OK to save your changes and exit, or select Cancel to exit without saving your changes.
Selecting Default restores factory settings.
7.3.3 Zoom/Focus adjustments
Zoom and focus adjustments
In this menu you can adjust the Zoom and Focus of the projector by clicking on the up and down arrows in the menu. When you have adjusted the image to your satisfaction, click on the OK button to exit and save your new settings.
7.3.4 Color manager
Color tone settings
The color manager is designed to give you optimal performance from your projector, inde- pendent of ambient lighting conditions.
In the color manager menu you can choose between four
7.3.5 Picture positioning
Picture positioning
Adjust vertical and horizontal position of the picture on the screen with the two sliders. Select OK to save your changes and exit, or select Cancel to exit without saving your changes.
2 6 |
| 2 7 |
|
|
|