3.Connecting a computer to the projector
The procedure for connecting a computer to the projector is the same for all types of com- puters.
1.Make sure the computer, monitor and pro- jector are switched off.
2.Identify the RGB out connector on the back of your computer (where you connect a monitor to the computer).
3.Connect the computer to the projector using the EVC cable and the adapter for the computer you are using. See figure 2.
4.If you have a desktop computer and want to display the image on your computer monitor, connect the cable from your mon- itor to the adapter. See figure 3.
5.If you want to use the remote control to control your computer, connect the correct mouse cable from the computer to the adapter box. See figure 4. When your com- puter is connected to the projector with the EVC cable (with EVC connector on the computer), the remote mouse control will automatically function as a regular mouse on your PC.
6.If you want to use sound with your com- puter, connect the stereo jack cable to the computer audio connection and to the PC adapter box.
7.Turn on the projector and the then the computer. The computer image should now be projected from the projector and the remote control should now work as a regu- lar mouse. If the computer’s image is not displayed simultaneously on the monitor, or the mouse is not working, see the sec- tion ‘What do I do if’.
4.Connecting a video source to the projec- tor
The procedure for connecting a video source to the projec- tor is the same for
SECAM, PAL N and PAL M modes are manually selected by pressing the “Green Button“. If the right format is not found the first time, press again. The video format is stored separately for each connector.
1.Make sure that the video source and the projector are switched off.
2.Connect the video cable from the Video out connector of the video source to the correct video connector on the projector plug panel.
3.Connect the audio cable from the Audio out connectors of the video source to the Audio in connectors on the projector. Connect the red plug to the red connector, and the other plug to the white connector. Red is the right stereo channel.
4.When all the connections are done and verified, switch on the video source and the projector.
5.The projector will now automatically dis- play the pictures from the video source. If not, see the section ‘What do I do if’.
Figure 6: Connecting to video sources
1 2 | 1 3 |
|
|