Onkyo HT-S5100 Wall Mounting, Using the Floor Pads for Subwoofer, Front speaker SKF-560F

Connecting Your Speakers—Continued

Wall Mounting

The speakers can easily be wall mounted by using the keyhole slots.

To mount the front or surround speakers vertically, use the keyhole slot shown to hang each speaker on a screw that’s securely screwed into the wall.

Front speaker (SKF-560F)

Leave a gap of between 3/16" (5 mm) and 7/16" (10 mm) between the wall and the base of the screw head, as shown.

(We recommend that you consult a home installa- tion professional.)

Wall

3/16" – 7/16"

(5 mm) – (10 mm)

Keyhole slot for wall mounting

Surround speaker/ Surround back speaker (SKM-560S/SKB-560)

Keyhole slot for wall mounting

To mount the center speaker horizontally, use the two keyhole slots shown to hang each speaker on two screws that are securely screwed into the wall.

Center speaker (SKC-560C)

Keyhole slots for wall mounting

11-13/16" (300 mm)

Caution:

A mounting screw’s ability to support a speaker depends on how well it’s anchored to the wall. If you have hollow walls, screw each mounting screw into a stud. If there are no studs, or the walls are solid, use suitable wall anchors. Use screws with a head diameter of 5/16" (9 mm) or less and a shank diameter of 1/8" (4 mm) or less. With hollow walls, use a cable/pipe detector to check for any power cables or water pipes before making any holes.

Using the Floor Pads for Subwoofer

If the subwoofer is placed on a hard floor (wood, vinyl, tile, etc.) and playback is very loud, the subwoofer's feet may damage the flooring. To prevent this, place the sup- plied pads underneath the subwoofer's feet. The pads also provide a stable base for the subwoofer.

Pad

24