Onkyo HT-S5100 instruction manual Advanced Setup, Crossover Frequency, Use the Down Button to

Advanced Setup—Continued

7	Use the Down [	] button to
	select “SurrBack,” and use the
	Left and Right [	]/[ ] buttons to
	select Small, Large, or None.

Small: Select if the surround back speakers are small.

Large: Select if the surround back

speakers are large.

None: Select if no surround back speakers are connected.

Notes:

•If the Surround setting in step 6 is set to None, or Powered Zone 2 is being used, this setting does not appear.

•If the Surround setting in step 6 is set to Small, the Large option cannot be selected.

8	Use the Down [	] button to
	select “SurrBack ch,” and use the
	Left and Right [	]/[ ] buttons to
	select 2ch or 1ch.

2ch: Select if two (left and right) surround back speakers are connected.

1ch: Select if one surround back

speaker is connected.

Note:

•If the Surround or SurrBack settings in steps 6 and 8 are set to None, this setting does not appear.

Continue with step 9 of the “Crossover

Frequency” setting.

Note:

•These settings cannot be changed while headphones are connected or the multichannel DVD input is being used.

Crossover Frequency

This setting is set automatically by the Automatic Speaker Setup function (see page 42).

This setting only applies to the speakers that you speci- fied as Small in the “Speaker Configuration” on page 77. To get the best bass performance from your speaker sys- tem, you need to set the crossover frequency according to the size and frequency response of your speakers

9	Use the Down [ ] button to
	select “Crossover,” and then use

the Left and Right []/[ ] but- tons to select a crossover fre- quency.

Continue with step 10 of the “Double

Bass” setting on the next page.

Notes:

•For a more accurate setting, look up the frequency response in the manuals supplied with your speakers and set accordingly.

•Choose a higher crossover frequency if you want more sound from your subwoofer.

•These settings cannot be changed while headphones are connected or the multichannel DVD input is being used.

78