Texas Instruments TUSB3210 manual EVM Operation, Eeprom, Gpio Connector

Page 17

Chapter 2

EVM Operation

This chapter describes the operation of the TUSB3210 EVM.

Topic		Page

2.1	TUSB3210 Setup	. . 2-2
2.2	Interfaces and USB Port	. . 2-2
2.3	Power Supplies	. . 2-2
2.4	Light Emitting Diodes (LEDs)	. . 2-2
2.5	Jumpers and Switches	. . 2-3
2.6	EEPROM	. . 2-3
2.7	GPIO Connector	. . 2-3

Chapter Title—Attribute Reference

2-1

Image 17

Contents User’s Guide Products Applications Important NoticeEVM Important Notice EVM Warnings and Restrictions About This Manual Read This FirstTrademarks Tables ContentsViii Topic Hardware and Software RequiredHardware Overview Equipment−2. TUSB3210 Evaluation Board −4. TUSB3210 Printed-Circuit Board REV 1.1-Top Side −5. TUSB3210 Printed-Circuit Board REV 1.2-Top Side Quantity Reference Part Bill of MaterialsSchematic Diagram Page Eeprom Gpio ConnectorEVM Operation Power Supplies TUSB3210 SetupInterfaces and USB Port Light Emitting Diodes LEDsJumper/Switch Jumper/Switch Description Jumpers and SwitchesGpio Connector −1. Gpio Connector NPN NPN