Texas Instruments TUSB3210 manual Read This First, About This Manual

Page 5

Related Documentation From Texas Instruments

Preface

Read This First

About This Manual

This user’s guide describes the setup and operation of the TUSB3210 generic evaluation board. Familiarity with universal serial bus (USB) protocol and common laboratory testing equipment is required and assumed throughout this user’s guide.

How to Use This Manual

This document contains the following chapters:

-Chapter 1—Hardware and Software Required

-Chapter 2—EVM Operation

Related Documentation From Texas Instruments

- TUSB3210

Literature No. SLLS466

- TPS76333

Literature No. SLVS181

- TPS2042

Literature No. SLVS173

- MAX232

Literature No. SLLS047

- MAX3232

Literature No. SLLS410

- Bootcode

Literature No. SLLU025

These files are available from Texas Instruments; contact technical support for assistance.

v

Image 5
Contents User’s Guide Products Applications Important NoticeEVM Important Notice EVM Warnings and Restrictions About This Manual Read This FirstTrademarks Tables ContentsViii Topic Hardware and Software RequiredHardware Overview Equipment−2. TUSB3210 Evaluation Board −4. TUSB3210 Printed-Circuit Board REV 1.1-Top Side −5. TUSB3210 Printed-Circuit Board REV 1.2-Top Side Quantity Reference Part Bill of MaterialsSchematic Diagram Page Eeprom Gpio ConnectorEVM Operation Power Supplies TUSB3210 SetupInterfaces and USB Port Light Emitting Diodes LEDsJumper/Switch Jumper/Switch Description Jumpers and SwitchesGpio Connector −1. Gpio Connector NPN NPN