Onkyo TX-SR573 Advanced Setup—Continued, Speaker Distance, Speaker Levels, Notes

Page 52

Advanced Setup—Continued

Advanced Setup—Continued

Speaker Distance

To get the best from surround sound, it’s important that the sound from each speaker reaches the listener at the same time. To achieve this, you need to specify the dis- tance from each speaker to the listening position.

1Measure and make a note of the distance from each speaker to the listening position.

2Press the [RECEIVER] REMOTE

RECEIVER	MODE button, followed by the
	[SETUP] button.

3	Use the Up and Down [ ]/[ ]
	buttons to select “2. Sp Dis-

Notes:

•The Center and Subwoofer distances can be set up to 5 ft. (1.5 m) more or less than the Front distance. For example, if the Front distance is set to 20 ft. (6 m), the Center and Subwoofer distances can be set between 15 and 25 ft. (4.5 and 7.5 m).

•The Surround and Surround Back distances can be set up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the Front distance. For example, if the Front distance is set to 20 ft. (6 m), the SurrRight, Surr Left, Surr Back R, and Surr Back L distances can be set between 5 and 25 ft. (1.5 and 7.5 m).

Speaker Levels

You can set the volume level of each speaker so that all speakers can be heard equally at the listening position.

Speaker levels cannot be adjusted while the

ENTER

ENTER

tance,” and then press the [ENTER] button.

AV receiver is muted.

1Press the [RECEIVER] REMOTE

RECEIVER	MODE button, followed by the
	[SETUP] button.

4While “Unit” is displayed, use the

Left and Right [ ]/[ ] buttons to select “feet” or “meters”.

ENTER

feet: Distances can be set in feet. Range: 1 to 30 feet in 1-foot steps.

meters: Distances can be set in meters. Range: 0.3 to 9 meters in 0.3-meter steps.

5		Use the Down [	] button to
		select a speaker, and use the Left
	ENTER	and Right [ ]/[	] buttons to
	ENTER	specify the distance.
		specify the distance.

2

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “3. Level Cal,” and then press the [ENTER] but- ton.

A pink noise test tone is output by the front left speaker.

6Repeat step 5 for all speakers.

Note:

Speakers that you set to No or None in the Speaker Conﬁguration (page 32) cannot be selected.

7Press the [SETUP] button.

Setup closes.

3Turn up the volume so that you can hear the test tone sufﬁ- ciently.

As each speaker outputs the test tone, its name appears on the display.

52

Image 52

Contents Contents TX-SR573Instruction Manual AV ReceiverImportant Safety Instructions AVISPrecautions Memory Backup4.Power For U.S. modelsSupplied Accessories FeaturesRemote Controller ProcessingContents Turning On & First Time SetupUsing the Listening Modes IntroductionFront Panel Front & Rear Panels2 3 4 5 6 78 9J K L Front & Rear Panels—Continued DisplayRear Panel Front & Rear Panels—ContinuedRemote Controller Installing the BatteriesUsing the Remote Controller NotesAbout the Remote Controller Modes Remote Controller—ContinuedRECEIVER/TAPE Mode Remote Controller—Continued ASTANDBY buttonDVD Mode Remote Controller-ContinuedCD, MD & CDR Modes Remote Controller—ContinuedHDD Mode Remote Controller—ContinuedConnecting Your Speakers About SpeakersConnecting Your Speakers—Continued Speaker Connection PrecautionsHow Many Speakers? Attaching the Speaker LabelsConnecting Speaker Set A Connecting a Powered SubwooferConnecting Speaker Set B Connecting Your Speakers—ContinuedConnecting the AM Loop Antenna Connecting AntennaConnecting the Indoor FM Antenna Connecting Antenna—Continued Connecting an Outdoor FM AntennaConnecting an Outdoor AM Antenna NotesConnecting Your Components About AV ConnectionsOptical Digital Jacks AV Connection Color CodingConnecting Your Components—Continued Which Connections Should I Use?Video Connection Formats Audio Connection FormatsConnecting Your Components—Continued Connecting a TV or ProjectorHint Connecting a DVD player Connecting Your Components—ContinuedConnecting a VCR or DVD Recorder for Playback Connecting Your Components—ContinuedVCR, DVD recorder or the otherConnecting a VCR or DVD Recorder for Recording Connecting Your Components—ContinuedConnecting Your Components—Continued With connectionConnecting a CD Player or Turntable Connecting Your Components—ContinuedCD Player or Turntable with Built-inPhono Preamp StepConnecting Your Components—Continued Connecting Another Component’s Power CordCassette recorder, CDR, etc Connecting -capableOnkyo Components Connecting the Power CordConnecting Your Components—Continued NotesSmooth Operation in a Few Easy Steps Turning On & StandbyTurning On the AV Receiver First Time Setup Assigning Digital Inputs to SourcesChanging the Input Display TUNER Digital inputs cannot be assigned toFirst Time Setup—Continued Speaker ConﬁgurationYes: Select if a subwoofer is con nectedFirst Time Setup—Continued properly, press the remote controller’s TESTNone NotesBasic AV Receiver Operation Playing Your AV ComponentsUsing the Multichannel DVD Input Playing Your AV Components—ContinuedDisplaying Source Information Interpreting Surround Channel InformationTuning into AM/FM Radio Stations Listening to the RadioListening to AM/FM Stations Displaying AM/FM Radio InformationConnecting the XM Antenna Listening to the Radio—ContinuedListening to XM Satellite Radio Signing Up for XM Satellite RadioSelecting XM Radio Channels indicatorListening to the Radio—Continued Channels cannot be selected while theListening to the Radio—Continued Displaying XM Radio InformationSelecting XM Channels from the Front Panel Positioning the XM Antenna XM Radio MessagesSETUP button Listening to the Radio—ContinuedPresetting AM/FM Stations & XM Channels Selecting PresetsDeleting Presets the preset number ﬂashesSetting the Display Brightness Adjusting the Bass & TrebleCommon Functions Muting the AV ReceiverUsing the Sleep Timer Adjusting Speaker LevelsUsing Headphones Common Functions—ContinuedUsing the Listening Modes Selecting with the Remote ControllerSelecting the Listening Modes Selecting on the AV receiverUsing the Listening Modes—Continued About the Listening Modes Using the Listening Modes—ContinuedOnkyo Original DSP Modes Using the Listening Modes—ContinuedMono Movie OrchestraUsing the CinemaFILTER Using the Late Night Function Dolby Digital onlyUsing the Audio Adjust Settings Using the Listening Modes—Continued Input Channel Settings PL II & PL IIx Music Mode Settings DTS Neo:6 Music Mode Setting Dolby Digital EX Input Signal SettingRecording Recording the Input SourceRecording from Different Sources 2.Prepare the VCR for recordingAdvanced Setup Advanced Speaker SettingsCrossover Frequency Double BassAdvanced Setup—Continued Speaker DistanceSpeaker Levels NotesDigital Signal Formats Advanced Setup—Continuedbuttons to adjust the speaker 6Press the SETUP buttonControlling Other Components Entering Remote Control CodesNotes Resetting the REMOTE MODE Buttons Resetting the Remote ControllerControlling Other Components—Continued Controlling a TV Controlling Other Components—Continued Learning Commands from Other Remote ControllersNotes Using Macros Making MacrosRunning Macros Deleting MacrosPower TroubleshootingAudio Video Troubleshooting—ContinuedTuner Remote Controller RecordingOthers Troubleshooting—ContinuedSpeciﬁcation Ampliﬁer SectionVideo Section Tuner SectionMemo ONKYO U.S.A. CORPORATION ONKYO EUROPE ELECTRONICS GmbHONKYO EUROPE UK Office ONKYO CHINA LIMITEDPage Page Page Page Page Page Page Page Page Page Page Page Page