2. Plug the 3.5mm stereo plug into the audio input jack of the recording device.
Description
Inside Car Mic Audio
Transmitter Audio
Audio Ground
Position
Tip
Ring
Sleeve
Sleeve
Ring
Tip 
3.If it is to be used, plug in the
4.Turn on the transmitter and place it in the charging cradle with the beltclip facing out. The Charge LED will light if there is power. If the LEDs do not come on, check the connections and repeat.
Installation is complete. Refer to Operation Section for more information.
Revision B | Page 5 of 9 | 12/11/08 |