Making General Settings for

Controlling the Projector via LAN

On this screen, you can make general settings relating to the network.

Items	Description
Projector	Setting the projector name.
Name
Auto Logout	Setting the time interval in which the
Time	projector will be automatically
	disconnected from the network in units
	of a minute (from 1 to 65535 minutes).
	If the set value is made 0, the Auto
	Logout function is disabled.
Data Port	Setting the TCP port number used
	when exchanging data with the
	projector (from 1025 to 65535).
Search Port	Setting the port number used when
	searching for the projector (from 1025
	to 65535).

After clicking the “Apply” button, the set values appear. Confirm that the values are set properly, and then click the “Confirm” button.

Note

•After setting items, wait for about 15 seconds and then re-access.

•Projector Name can be up to 12 characters.

•You can input the characters below: A-Z, 0-9, -, _, (,), space

(When “a-z” are input, they are converted to “A-Z” automatically.)

Setting for Sending E-mail when an Error Occurs

On this screen, you can make settings for sending e-mail to report when the projector has generated an error.

Items	Setting example / Remarks
SMTP Server	Setting an SMTP server address for e-
	mail transmission.
	e.g.1: 192.168.150.253
	e.g.2: smtp123.sharp.co.jp
	* When using a domain name, make
	settings for the DNS server.
Originator E-	Setting the projector's e-mail address.
mail Address	The e-mail address set here becomes
	Originator E-mail Address.
Originator	Setting the sender's name. The name
Name	set here appears in the “Originator
	Name” column of the body of the
	message.

Note

•SMTP Server, Originator E-mail Address and Originator Name can be up to 64 characters.

•You can input the characters below:

SMTP Server and Originator E-mail Address:

a-z, A-Z, 0-9, !, #, $, %, &, *, +, -, /, =, ?, ^, {, , }, ~, _, ', ., @, `

(You can input “@” only one time for “Originator E-mail Address”.)

Originator Name : a-z, A-Z, 0-9, -, _, (,), space

•If the settings of “3. Setting up a Network Connection for the Projector” on pages 15 and 16 are incorrectly set, e-mail will not be sent.

-20