Activating the sRGB Color Management Function
This function calibrates the projector’s output to conform to sRGB standard (6,500K).
Setting the Color Manage- ment Function (sRGB)
Select “sRGB” in the “Options (1)”menu
➝For settings, see page 36.
Note
•When setting sRGB to “ON”, the pro- jected image may become dark; however, this does not indicate a malfunction.
•For additional information about sRGB function, please visit “http://www.srgb.com/”.
Info
When “sRGB” is set to “ON”;
•The gamma correction cannot be set.
•“Red”, “Blue” or “CLR Temp” in “Picture” cannot be adjusted.
Auto Search Function
This function automatically searches for and switches to the input mode in which signals are being received, when the projector is turned on, or when the INPUT button is pressed.
Using Auto Search
Select “Auto Search” in the “Options
(1)” menu ➝ For settings, see page 36.
Note
•
ON
Automatically switches to the input mode in which signals are being received, when
turning on the projector or pressing 
on the projector.
•
OFF
For switching input modes manually in
order by pressing 
on the projector.
•To stop searching for the input mode,
press 
on the projector, or 
, 
or 
on the remote control.
Info
•Even while this function is searching for input
signals, whenever 
, 
or 
on the re- mote control is pressed, the input mode is switched to the respective one.
•Even while the function is searching for input
signals, pressing any buttons besides 
, 
and | returns to the previous input mode. | |
|
|
Easy to Use Functions