
Regarding the Lamp (cont.)
Removing and Install- ing the Lamp Unit
Lamp
Info
unit
•Be sure to remove the lamp unit by the handle. Be sure not to touch the glass surface of the lamp unit or the inside of the projector.
•To avoid injury to yourself and damage to the lamp, be sure to carefully follow the steps below.
•Do not loosen other screws except for the lamp unit cover and lamp unit.
•Please refer to the installation manual included with the lamp unit.
1 Press
on the projector to turn off the power.
•Wait until the cooling fan stops.
POWER button
2
3
Disconnect the power cord.
•Unplug the power cord from the AC socket.
•Leave the lamp until it has fully cooled down (about 1 hour).
Remove the lamp unit cover.
•Turn over the projector, and loosen the user service screw that secures the lamp unit cover. Then slide the cover in the direction of the arrow.
AC socket
User service screw
-72