Sharp PG-LX2000 appendix Operating with the Remote Control, Displaying and Setting the Break Timer

Page 32

Operating with the Remote Control

MAGNIFY buttons

FREEZE button

PICTURE MODE button

AUTO SYNC button

BREAK TIMER button SPOT button

Adjustment buttons (P/R/O/Q)

EFFECT button

ECO+QUIET button POINTER button

Displaying and Setting the Break Timer

1 Press BREAK TIMER.

•The timer starts to count down from 5 minutes.

On-screen display

2 Press P/R/O/Q to adjust the length of the break time.

• Increases with P or Q

5 minutes ➞ 6 minutes ➞ 60 minutes

• Shortens with O or R

4 minutes ➞ 3 minutes ➞1 minute

• The break time can be set in units of one minute (up to 60 minutes).

Canceling the break timer display function

Displaying the Pointer

1 Press POINTER and press P/R/ O/Qon the remote control to move the pointer.

•Press EFFECT to change the pointer icon (5 types).

Star Finger1 Finger2 Heart Underline

2 Press POINTER again.

• The pointer will disappear.

Using the Spot Function

1 Press SPOT and press P/R/O/Q on the remote control to move the spot area.

•Press EFFECT to change the spot area size (3 types).

1/9

1/25

1/8

 

 

 

2 Press SPOT again.

• The spot area will disappear.

Switching the Eco+Quiet Mode

Press BREAK TIMER.

Note

•The Break Timer is not available while the projector is operating the following functions.

-Auto Sync

-Freeze

-AV Mute

-Input Search

Press ECO+QUIET to switch the Eco+Quiet mode between on and off.

•When the Eco+Quiet Mode is set to “ON”, the sound of the cooling fan will turn down, the power consumption will decrease, and the lamp life will extend.

Note

• Refer to “Eco+Quiet” on page 40 for details.

30

Page 31 Page 33
Image 32
Page 31 Page 33
Contents PG-LX2000 PG-LS2000 Model No Serial No See bottom of projector Void the users authority to operate this equipmentInformation Product Disposal Accessories Optional accessoriesContents Reference Viewing Stereoscopic 3D ImagesCleaning Power SourcesAccessories Power-Cord ProtectionDamage Requiring Service Replacement PartsSafety Check OverloadingDo not block the exhaust and intake vents Avoid locations with extremes of temperatureRest your eyes occasionally Other connected equipment Using the projector in other countriesTemperature monitor function Part Names and Functions 15 16Rear View Terminals Part Names and Functions Usable Range Remote control signal transmittersInserting the Batteries Setup and Projection Easy StartTurn the computer on Turn the power off Setting Up the Projector Video SetupSetting Up the Projector Standard Setup Front ProjectionSignal Input Normal Mode Signal Input 169 ModeScreen Size and Projection Distance Screen Lens centerProjection PRJ Mode Ceiling-Mount SetupConnecting the Projector to Other Equipment You may need other cables or connectors not listed belowConnecting the Projector to Other Equipment Connecting the Power Cord AC socket To AC outlet Power cord suppliedRS-232C Terminal D-sub 9 pin male connector Controlling the Projector by a ComputerTurning the Projector On Power indicator Lamp indicatorTurning the Projector On/Off About the Setup Guide Adjusting the Projected Image Adjusting the FocusPress Enter to exit the Setup Guide screen Image ProjectionAdjusting the Height Adjusting the Picture SizeUse the rear adjustment foot to make the projector level Rotate the zoom ring to enlarge or shrink the picture sizePress Keystone to enter the Keystone Correction mode Press P/Q or O/R to adjust Keystone CorrectionCorrecting Trapezoidal Distortion Press KeystoneSwitching the Input Mode Adjusting the VolumeButton Resize ModePress Resize About Copyrights Operating with the Remote Control Displaying and Setting the Break TimerUsing the Spot Function Switching the Eco+Quiet ModeAuto Sync Auto Sync Adjustment Selecting the Picture ModeFreezing a Moving Image Displaying an Enlarged Portion of an ImageMenu Items Picture menuMain menu Projector adjustment PRJ-ADJ1/2 menu Using the Menu Screen Menu Selections Quick Start MenuPress Menu ExampleExample Adjusting Bright Quick Start MenuMenu Selections Complete Menu Following items can be configured on the Quick Start MenuTo adjust the projected image while watching it Press P or R and select Bright to adjustPress O or Q to adjust the item selected Press EnterMenu operation n Picture Adjustment Picture MenuSelecting the Picture Mode Adjusting the Image Adjusting the Color TemperatureAdjusting the Colors Adjusting Hue, Saturation, or ValueReducing Image Noise DNR Selecting the Film ModeEco+Quiet Signal Type Setting Signal Adjustment SIG-ADJ MenuResolution Setting Setting the Video System Setting the Video SetupChecking the Input Signal When reproducing Ntsc signals in PAL video equipmentAdjusting the Projected Image SCR-ADJ Menu Setting the Resize ModeAdjusting the Image Position Keystone CorrectionSetting the Overscan Setting the On-screen DisplayClosed Caption For Americas onlySelecting the Setup Guide Selecting the Background ImageReversing/Inverting Projected Images Selecting the Wall ColorAuto Sync Auto Sync Adjustment Auto Power Off FunctionSpeaker Setting Fan Mode SettingTo cancel the keycode that you have already set When the System Lock is setSystem Lock Function Enter the same keycode in Re- confirmAdjusting the Projector Function PRJ-ADJ1/2 Menu Keylock FunctionTaking the Keylock Off Select On, then press EnterSetting the Function Button Operation Standby ModeReturning to the Default Settings Selecting the Quick Start MenuPrecautions on Viewing Stereoscopic 3D Images Viewing Stereoscopic 3D ImagesAppendix Shutter glasses control light signalInformation on the 3D Projection Function Ending 3D projection Using 3D Viewing ModeProjecting 3D images Maintenance Cleaning the projectorMaintenance Indicators About the temperature warning indicatorAbnormally high Are high Lower than 95F +35ºC Replacing the Lamp Regarding the LampLamp STANDBY/ON button AC socket Removing and Installing the Lamp UnitRemove the lamp unit cover Resetting the Lamp Timer RS-232C Specifications and Commands Computer controlCommunication conditions Basic formatCommands ProjectorRGB PAL CC1 Compatibility Chart ComputerDTV Troubleshooting 19-2253, 54 Problem Check Sharp Electronics Corporation Specifications Dimensions Units inches mmIndex

PG-LS2000, PG-LX2000 specifications

The Sharp PG-LX2000 and PG-LS2000 are advanced multimedia projectors designed to cater to a variety of presentation needs in educational and professional environments. Both models boast impressive specifications that highlight their performance and usability.

The PG-LX2000 is a lightweight LCD projector, featuring a compact design that makes it easy to transport. It delivers a bright picture with a high brightness rating of 3,000 lumens, ensuring that images remain clear even in well-lit rooms. This model has a native XGA resolution of 1024 x 768 pixels, providing sharp images for detailed presentations. It supports a range of input options, including HDMI, VGA, and composite video, making it versatile for different devices.

On the other hand, the PG-LS2000 stands out with its laser technology. It utilizes a 3LCD laser light source that offers long-lasting brightness of 3,000 lumens, combined with a WUXGA resolution of 1920 x 1200 pixels. This projector provides wider color gamuts and enhanced contrast ratios, ensuring vibrant and dynamic visuals. The laser light source significantly reduces maintenance requirements, with a lifespan of up to 20,000 hours, yielding a lower total cost of ownership over time.

Both projectors feature a range of connectivity options, including USB Type-A and Type-B for easy integration with various computing devices. They support wireless presentation capabilities, allowing users to connect via mobile devices, streamlining setup for meetings and collaborative work. Additionally, the built-in 10W speaker enhances audio output, eliminating the need for external sound systems in smaller settings.

The PG-LX2000 and PG-LS2000 also incorporate features aimed at user convenience and digital signage. They include a quick start-up time, allowing presenters to begin within seconds. The projectors also offer a vertical keystone correction feature, compensating for image distortion when projecting at an angle, ensuring that the visual output is always aligned correctly.

Moreover, energy-saving technologies are integrated into both models, including eco modes that adjust brightness based on ambient light, contributing to reduced power consumption. They also support DICOM simulation mode, making them suitable for medical applications where precise imagery is crucial.

In conclusion, the Sharp PG-LX2000 and PG-LS2000 projectors encapsulate the brand’s commitment to quality, innovation, and user-friendly design. With their versatile features and robust performance, they are well-suited for educators, business professionals, and anyone in need of reliable presentation tools.
Top Page Image Contents