Sharp PG-LS2000, PG-LX2000 appendix 53, 54

Page 69

Problem

Check

Page

 

 

 

Maintenance indicator on

• See “Maintenance Indicators”.

54

the projector illuminates

 

 

or blinks in red.

 

 

 

 

 

Picture is green on

• Change the input signal type setting.

41

COMPUTER (YPbPr)/

 

 

HDMI (YPbPr)

 

 

 

 

 

Picture is pink

 

 

(no green) on

 

 

COMPUTER (RGB)/

 

 

HDMI (RGB)

 

 

Picture is too bright and

• Image adjustments are incorrectly set.

39

whitish.

 

 

The cooling fan becomes

• When temperature inside the projector increases, the cooling fan runs

8, 9

noisy.

faster.

53, 54, 55

 

 

 

The lamp does not light

• The lamp indicator is illuminating in red.

54, 57, 58

up even after the

Replace the lamp.

 

projector turns on.

 

 

The lamp suddenly turns

 

 

off during projection.

 

 

 

 

 

The image sometimes

• Cables are incorrectly connected to the projector or the connected

19–22

fl ickers.

equipment works improperly.

 

 

• If this happens frequently, replace the lamp.

57

The lamp needs much

• The lamp will eventually need to be changed.

57

time to turn on.

While the remaining lamp life draws to a close, replace the lamp.

 

 

 

 

Picture is dark.

 

 

 

 

 

The remote control

• Operate the remote control while pointing it at the projector's remote

13

cannot be used.

control sensor.

 

 

• The remote control may be too far away from the projector.

 

 

• If direct sunlight or a strong fl uorescent lamp is shining on the

 

 

projector's remote control sensor, place the projector where it will not

 

 

be affected by strong light.

 

 

• The batteries may be depleted or inserted incorrectly. Make sure the

13

 

batteries are inserted correctly or insert new ones.

 

Appendix

67

Page 68 Page 70
Image 69
Page 68 Page 70
Contents PG-LX2000 PG-LS2000 Model No Serial No Void the users authority to operate this equipment See bottom of projectorInformation Product Disposal Optional accessories AccessoriesContents Viewing Stereoscopic 3D Images ReferencePower Sources CleaningAccessories Power-Cord ProtectionReplacement Parts Damage Requiring ServiceSafety Check OverloadingAvoid locations with extremes of temperature Rest your eyes occasionallyDo not block the exhaust and intake vents Using the projector in other countries Temperature monitor functionOther connected equipment 15 16 Part Names and FunctionsRear View Terminals Part Names and Functions Remote control signal transmitters Inserting the BatteriesUsable Range Easy Start Setup and ProjectionTurn the computer on Turn the power off Video Setup Setting Up the ProjectorSetting Up the Projector Standard Setup Front ProjectionSignal Input 169 Mode Signal Input Normal ModeScreen Size and Projection Distance Screen Lens centerCeiling-Mount Setup Projection PRJ ModeYou may need other cables or connectors not listed below Connecting the Projector to Other EquipmentConnecting the Projector to Other Equipment AC socket To AC outlet Power cord supplied Connecting the Power CordControlling the Projector by a Computer RS-232C Terminal D-sub 9 pin male connectorPower indicator Lamp indicator Turning the Projector On/OffTurning the Projector On Adjusting the Projected Image Adjusting the Focus About the Setup GuidePress Enter to exit the Setup Guide screen Image ProjectionAdjusting the Picture Size Adjusting the HeightUse the rear adjustment foot to make the projector level Rotate the zoom ring to enlarge or shrink the picture sizePress P/Q or O/R to adjust Keystone Correction Press Keystone to enter the Keystone Correction modeCorrecting Trapezoidal Distortion Press KeystoneAdjusting the Volume Switching the Input ModeResize Mode Press ResizeButton About Copyrights Displaying and Setting the Break Timer Operating with the Remote ControlUsing the Spot Function Switching the Eco+Quiet ModeSelecting the Picture Mode Auto Sync Auto Sync AdjustmentFreezing a Moving Image Displaying an Enlarged Portion of an ImagePicture menu Menu ItemsMain menu Projector adjustment PRJ-ADJ1/2 menu Menu Selections Quick Start Menu Using the Menu ScreenPress Menu ExampleQuick Start Menu Example Adjusting BrightMenu Selections Complete Menu Following items can be configured on the Quick Start MenuPress P or R and select Bright to adjust To adjust the projected image while watching itPress O or Q to adjust the item selected Press EnterPicture Adjustment Picture Menu Selecting the Picture ModeMenu operation n Adjusting the Color Temperature Adjusting the ImageAdjusting the Colors Adjusting Hue, Saturation, or ValueSelecting the Film Mode Eco+QuietReducing Image Noise DNR Signal Adjustment SIG-ADJ Menu Resolution SettingSignal Type Setting Setting the Video Setup Setting the Video SystemChecking the Input Signal When reproducing Ntsc signals in PAL video equipmentSetting the Resize Mode Adjusting the Projected Image SCR-ADJ MenuAdjusting the Image Position Keystone CorrectionSetting the On-screen Display Setting the OverscanClosed Caption For Americas onlySelecting the Background Image Selecting the Setup GuideReversing/Inverting Projected Images Selecting the Wall ColorAuto Power Off Function Auto Sync Auto Sync AdjustmentSpeaker Setting Fan Mode SettingWhen the System Lock is set To cancel the keycode that you have already setSystem Lock Function Enter the same keycode in Re- confirmKeylock Function Adjusting the Projector Function PRJ-ADJ1/2 MenuTaking the Keylock Off Select On, then press EnterStandby Mode Setting the Function Button OperationReturning to the Default Settings Selecting the Quick Start MenuViewing Stereoscopic 3D Images Precautions on Viewing Stereoscopic 3D ImagesShutter glasses control light signal Information on the 3D Projection FunctionAppendix Using 3D Viewing Mode Projecting 3D imagesEnding 3D projection Cleaning the projector MaintenanceAbout the temperature warning indicator Maintenance IndicatorsAbnormally high Are high Lower than 95F +35ºC Regarding the Lamp LampReplacing the Lamp Removing and Installing the Lamp Unit Remove the lamp unit coverSTANDBY/ON button AC socket Resetting the Lamp Timer Computer control RS-232C Specifications and CommandsCommunication conditions Basic formatProjector CommandsRGB PAL CC1 Computer Compatibility ChartDTV 19-22 Troubleshooting53, 54 Problem Check Sharp Electronics Corporation Specifications Units inches mm DimensionsIndex

PG-LS2000, PG-LX2000 specifications

The Sharp PG-LX2000 and PG-LS2000 are advanced multimedia projectors designed to cater to a variety of presentation needs in educational and professional environments. Both models boast impressive specifications that highlight their performance and usability.

The PG-LX2000 is a lightweight LCD projector, featuring a compact design that makes it easy to transport. It delivers a bright picture with a high brightness rating of 3,000 lumens, ensuring that images remain clear even in well-lit rooms. This model has a native XGA resolution of 1024 x 768 pixels, providing sharp images for detailed presentations. It supports a range of input options, including HDMI, VGA, and composite video, making it versatile for different devices.

On the other hand, the PG-LS2000 stands out with its laser technology. It utilizes a 3LCD laser light source that offers long-lasting brightness of 3,000 lumens, combined with a WUXGA resolution of 1920 x 1200 pixels. This projector provides wider color gamuts and enhanced contrast ratios, ensuring vibrant and dynamic visuals. The laser light source significantly reduces maintenance requirements, with a lifespan of up to 20,000 hours, yielding a lower total cost of ownership over time.

Both projectors feature a range of connectivity options, including USB Type-A and Type-B for easy integration with various computing devices. They support wireless presentation capabilities, allowing users to connect via mobile devices, streamlining setup for meetings and collaborative work. Additionally, the built-in 10W speaker enhances audio output, eliminating the need for external sound systems in smaller settings.

The PG-LX2000 and PG-LS2000 also incorporate features aimed at user convenience and digital signage. They include a quick start-up time, allowing presenters to begin within seconds. The projectors also offer a vertical keystone correction feature, compensating for image distortion when projecting at an angle, ensuring that the visual output is always aligned correctly.

Moreover, energy-saving technologies are integrated into both models, including eco modes that adjust brightness based on ambient light, contributing to reduced power consumption. They also support DICOM simulation mode, making them suitable for medical applications where precise imagery is crucial.

In conclusion, the Sharp PG-LX2000 and PG-LS2000 projectors encapsulate the brand’s commitment to quality, innovation, and user-friendly design. With their versatile features and robust performance, they are well-suited for educators, business professionals, and anyone in need of reliable presentation tools.
Top Page Image Contents